Order Products : sales@su-jiao.com
Vytaflex® 10
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Smooth-On, Inc |
| Trademark: | Vytaflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vgEnOM_Vytaflex-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Using Smooth-On's exclusive "V-Polymer®" technology, VytaFlex® urethane rubbers offer superior physical and performance properties for casting concrete. VytaFlex® urethanes are available in 10A, 20A, 30A, 40A, 50A and 60A Shore hardness's and feature convenient one-to-one by volume mix ratios. Vacuum degassing is not necessary and VytaFlex® rubbers cure with negligible shrinkage to a durable rubber that will last in production. VytaFlex® mold rubbers work especially well for casting pigmented / colored concrete. Molds made with VytaFlex® Series urethanes will render accurate and uniform colored castings. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.998 | g/cm³ | ASTM D1475 |
| Specific Volume | 1.01 | cm³/g |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Mixing Ratio | 1:1 by weight 1:1 by volume |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | < 0.10 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 10 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.172 | MPa | ASTM D412 |
| Tensile Strength (Break) | 1.38 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 1000 | % | ASTM D412 |
| Tear Strength 1 | 6.65 | kN/m | ASTM D624 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pot Life | 30 | min | |
| Thermoset Mix Viscosity | 3100 | cP | ASTM D2393 |
| Demold Time | 960 | min |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Polymer-E EV101 | Asia Polymer Corporation (APC) | EVA | Polymer-E |
| SPI PC25RU | Service Polymers, Inc. | PC | SPI |
| NOVADURAN® 5710F40 | Mitsubishi Engineering-Plastics Corp | PBT Alloy | NOVADURAN® |
| ASTALAC™ ASA 202 | Marplex Australia Pty. Ltd. | ASA | ASTALAC™ |
| LNP™ STAT-KON™ WE002 compound | SABIC Innovative Plastics | PBT | LNP™ STAT-KON™ |
