Order Products : sales@su-jiao.com
Kazan LDPE 15313-003 OKP 22 1111 2003
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Kazanorgsintez Joint Stock Company |
| Trademark: | Kazan LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vg5y58_Kazan-LDPE-15313-003-OKP-22-1111-2003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
GOST / TU: GOST 16337-77 LDPE is produced by means of polymerization of ethyiene under high pressure in tubular or stirred reactorwith the use of radical type initiator. LDPE is used for manufacturing of pipes, fittings, articles contacting with food, toys, films etc. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 0.919 to 0.922 | g/cm³ | |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | |
| Environmental Stress-Cracking Resistance | > 500 | hr | |
| Melt Flow - Dispersin within a batch 1 | < 15 | % |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Number of Inclusions | > 30.0 | ||
| Odor Rating | < 1.00 |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Stress | |||
| Yield | > 100 | MPa | |
| Break | > 140 | MPa | |
| Tensile Strain (Break) | > 600 | % |
| Note Message | |
|---|---|
| 1 . | ± |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Statimax 810 | Polymics, Ltd. | PBI | Statimax |
| KER® 1739 | Synthos S.A. | SBR, Emulsion | KER® |
| KOPA® KN136 | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
| Kumho KNB 3345 | Korea Kumho Petrochemical Co., Ltd. | NBR | Kumho KNB |
| POFEX EP8004S150V | POLYROCKS CHEMICAL CO., LTD | XLPE | POFEX |
