Cardia Biohybrid™ H-FM

Category:	TPS+PP , Thermoplastic Starch + PP
Manufacturer:	Cardia Bioplastics™
Trademark:	Cardia Biohybrid™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vfLFE1_Cardia-Biohybrid-H-FM.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Cardia Biohybrid™ H-FM is based on a blend of thermoplastic starch (TPS) and polyolefin's. This grade of resin is compatibilised to offer a high level of mechanical strength, good elongation properties and toughness. The resin is based on corn starch which is a renewable material. A Biohybrid resin for foaming applications where biodegradability is not required. For use in applications where the use of renewable resources are desired. Can be used with chemical and physical blowing agents Cardia Biohybrid™ H-FM is formulated with 50% of renewable thermoplastic starch polymer. This resin is suitable for a range of products manufactured by foam extrusion. Due to its high content of polyolefins the material is not a fully biodegradable polymer and is not intended for ultimate disposal in commercial composting facilities. Applications Extrusion foaming of packaging shapes Extrusion foaming of sheet for packaging and cushioning Extruded boards for packaging and insulation applications

Message

Cardia Biohybrid™ H-FM is based on a blend of thermoplastic starch (TPS) and polyolefin's. This grade of resin is compatibilised to offer a high level of mechanical strength, good elongation properties and toughness. The resin is based on corn starch which is a renewable material.

A Biohybrid resin for foaming applications where biodegradability is not required.

For use in applications where the use of renewable resources are desired.

Can be used with chemical and physical blowing agents

Cardia Biohybrid™ H-FM is formulated with 50% of renewable thermoplastic starch polymer. This resin is suitable for a range of products manufactured by foam extrusion. Due to its high content of polyolefins the material is not a fully biodegradable polymer and is not intended for ultimate disposal in commercial composting facilities.

Applications

Extrusion foaming of packaging shapes

Extrusion foaming of sheet for packaging and cushioning

Extruded boards for packaging and insulation applications

General Information
Features	Foamable Food Contact Acceptable Good Toughness High Elongation High Strength Renewable Resource Content
Uses	Foam Insulation Packaging Sheet
Agency Ratings	EU 2002/72/EC
Processing Method	Foam Extrusion

Physical	Nominal Value	Unit	Test Method
Density	1.10	g/cm³	ASTM D4883
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	3.6	g/10 min	ASTM D1238
Moisture Content	< 0.60	%

Additional Information	Nominal Value	Unit
Biobased Content - Starch	50	%

Thermal	Nominal Value	Unit	Test Method
Peak Melting Temperature	165	°C	ASTM D3418

Resin Grade	Manufacturer	Category	Trademark
Razalen® R123 TR15	Razin™ Engineering Plastics	PP+EPDM	Razalen®
TYNELOY® CE1918	Tyne Plastics LLC.	PC+PET	TYNELOY®
UBE Nylon 1013 IU50	UBE Engineering Plastics, S.A.	Nylon 6	UBE Nylon
NYLOY® M-0030N-V N1-1	Nytex Composites Co., Ltd.	Nylon 66	NYLOY®
Plaslube® POM CO E TL20	Techmer Engineered Solutions	Acetal (POM) Copolymer	Plaslube®