Order Products : sales@su-jiao.com
Miramid® S3CW
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | BASF Leuna GmbH |
| Trademark: | Miramid® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vfDiyE_Miramid-S3CW.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Miramid® S3CW is a Polyamide 66 (Nylon 66) material. It is available in Europe for injection molding. Important attributes of Miramid® S3CW are:
Typical application of Miramid® S3CW: Engineering/Industrial Parts |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1130 | -- | kg/m³ | ISO 1183 1 |
| Water Absorption | ISO 62 2 | |||
| Saturation | 8.0 | -- | % | |
| Equilibrium | 2.5 | -- | % | |
| Viscosity number | 145 | -- | cm³/g | ISO 307, 1157, 1628 3 |
| Hardness | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Ball Indentation Hardness | 160 | -- | MPa | ISO 2039-1 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile modulus | 3000 | 1800 | MPa | ISO 527-2 4 |
| Tensile Stress (Yield) | 80.0 | 60.0 | MPa | ISO 527-2 5 |
| Tensile Strain (Yield) | 5.0 | 20 | % | ISO 527-2 6 |
| Flexural Stress 7(3.5% Strain) | 90.0 | 50.0 | MPa | ISO 178 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy notched impact strength | ISO 179/1eA 8 | |||
| -30°C | 3.00 | -- | kJ/m² | |
| 23°C | 4.00 | 20.0 | kJ/m² | |
| Charpy impact strength | ISO 179/1eU 9 | |||
| -30°C | No Break | -- | ||
| 23°C | No Break | No Break |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Deflection Temperature Under Load | ISO 75-2 10 | |||
| 0.45 MPa | 200 | -- | °C | |
| 1.8 MPa | 70.0 | -- | °C | |
| Continuous Use Temperature | ISO 2578 | |||
| -- 11 | 110 | -- | °C | |
| -- 12 | 120 | -- | °C | |
| -- 13 | 200 | -- | °C | |
| Melting Temperature (DSC) | 260 | -- | °C | ISO 3146 |
| Electrical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Volume resistivity | 1.0E+13 | 1.0E+10 | ohms·m | IEC 60093 14 |
| Dielectric Constant (1 MHz) | 3.40 | 5.00 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 0.025 | 0.20 | IEC 60250 15 | |
| Comparative tracking index | 500 | -- | IEC 60112 16 |
| Flammability | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Burning Rate (1.00 mm) | < 100 | -- | mm/min | FMVSS 302 |
| Flame Rating (1.50 mm) | HB | -- | UL 94 | |
| Burning Behav. at thickness h (1.50 mm) | HB | -- | ISO 1210 17 | |
| Glow Wire Flammability Index (1.00 mm) | 850 | -- | °C | IEC 60695-2-12 |
| Injection | Dry | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 280 to 300 | °C | |
| Mold Temperature | 70.0 to 80.0 | °C |
| Note Message | |
|---|---|
| 1 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 2 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 4 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 5 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 6 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 7 . | Typical values for uncoloured product at 23°C and 50% relative humidity |
| 8 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 9 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 10 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 11 . | Temperature index at loss of 50% tensile strength, 20000h |
| 12 . | Temperature index at loss of 50% tensile strength, 5000h |
| 13 . | Short time |
| 14 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 15 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 16 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 17 . | Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P2631 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| RTP 4601 HI | RTP Company | SPS | RTP |
| SCLAIR® 2607 | NOVA Chemicals | HDPE | SCLAIR® |
| Wellamid® MR410 22H-WBK | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| DOW™ Electrical & Telecommunications DGDL-3479 BK | The Dow Chemical Company | HDPE | DOW™ Electrical & Telecommunications |
