Order Products : sales@su-jiao.com
Techsil® TIM11123 (GB)
| Category: | Silicone Rubber, RTV-1 , Silicone Rubber, RTV-1 |
| Manufacturer: | Techsil Limited |
| Trademark: | Techsil® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vdnPXw_TechsilTIM11123GB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Techsil TIM11123 (GB) Grey is a 200 micron, self-gapping, non-corrosive, 1-part, room temperature vulcanising (RTV) silicone rubber. It is one of a new family of products called acetone cure sealants. These products are cured rapidly in contact with atmospheric moisture to a tough rubber that exhibits an excellent thermal conductive property of ~2.3 W/m K. TIM11123 (GB) does not corrode copper or its alloys and exhibits excellent primerless adhesion to many substrates when fully cured. It has been designed to be flowable and contains glass beads to control bond line thickness. Key Features
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.11 | g/cm³ | BS 903 |
| Molding Shrinkage - Flow | 0.50 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 1.6E-4 | cm/cm/°C | |
| Thermal Conductivity | 2.3 | W/m/K | |
| Service Temperature 1 | -50 - 220 | °C |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volumetric Expansion | 4.9E-4 | cm/cm/°C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Strength | > 20 | kV/mm | ASTM D149 |
| Dielectric Constant (1 MHz) | 4.90 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 9.0E-4 | ASTM D150 |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Viscosity (Brookfield RVT) | 350 | Pa·s | |
| Curing Time (23°C) | < 8.0 | hr | |
| Tack Free Time (23°C, 65% RH) | 4.0 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 67 | ASTM D2240 | |
| Tensile Strength | 3.90 | MPa | BS 903 |
| Tensile Elongation at Break | 100 | % | BS 903 |
| Note Message | |
|---|---|
| 1 . | AFS 1540B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ResMart Ultra Nylon 6 6 | ResMart | Nylon 66 | ResMart Ultra |
| TECHNYL® A R 218 V25 BLACK | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
| TRIREX® 3026PJ(B1) | Samyang Corporation | PC | TRIREX® |
| Bormed™ HD810MO | Borealis AG | PP Homopolymer | Bormed™ |
| LNP™ LUBRICOMP™ DFL36E compound | SABIC Innovative Plastics Europe | PC | LNP™ LUBRICOMP™ |
