Order Products : sales@su-jiao.com

DOW™ HDPE DMDA-8965 NT 7

Category:	HDPE , High Density Polyethylene Resin
Manufacturer:	The Dow Chemical Company
Trademark:	DOW™ HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vcG32W_DOW-HDPE-DMDA-8965-NT-7.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Injection molding

For injection molded thin-wall food containers

Excellent processability

Good impact strength and rigidity

Very narrow molecular weight distribution

Complies with U.S. FDA 21 CFR 177.1520 (c)3.1a

Complies with Canadian HPFB No Objection (With Limitations)

Complies with EU, No 10/2011

Complies with U.S. FDA DMF

Complies with U.S. FDA 21 CFR 177.1520(c)3.2a

Consult the regulations for complete details.

DOW DMDA-8965 NT 7 High Density Polyethylene (HDPE) Resin is produced via UNIPOL™ Process Technology from Dow and is intended for use in thinwall injection molding applications such as food containers. This resin has been designed to provide good toughness and excellent processability.

General Information
Agency Ratings	DMF not rated FDA 21 CFR 177.1520(c) 3.1a FDA 21 CFR 177.1520(c) 3.2a HPFB (Canada) No Objection 2 Europe No 10/2011
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.952	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	66	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	59		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	17.2	MPa	ASTM D638
Fracture	28.3	MPa	ASTM D638
Tensile Elongation			ASTM D638
Yield	1.0	%	ASTM D638
Fracture	10	%	ASTM D638
Flexural Modulus - 2% Secant	1000	MPa	ASTM D790B

Impact	Nominal Value	Unit	Test Method
Tensile Impact Strength ¹	63.0	kJ/m²	ASTM D1822

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	68.9	°C	ASTM D648
Brittleness Temperature	-75.0	°C	ASTM D746
Vicat Softening Temperature	122	°C	ASTM D1525
Melting Temperature (DSC)	128	°C	Internal method
Peak Crystallization Temperature (DSC)	116	°C	Internal method

Additional Information
根据 ASTM D 4976 进行基板模制和测试。

Note Message
1 .	Type s

Resin Grade	Manufacturer	Category	Trademark
NILENE® P20 K65B	Taro Plast S.p.A.	PP Homopolymer	NILENE®
Ducor® DE1040V	Ducor Petrochemicals BV	PP Homopolymer	Ducor®
DOWLEX™ 2035	The Dow Chemical Company	LLDPE	DOWLEX™
Lupol® HI5204	LG Chem Ltd.	TPO	Lupol®
PLASTRON™ PPS-GF50-01	Daicel Polymer Ltd.	PPS	PLASTRON™