Order Products : sales@su-jiao.com
ULTEM™ JD7904 resin
| Category: | PEI , Polyether Imide |
| Manufacturer: | SABIC Innovative Plastics Asia Pacific |
| Trademark: | ULTEM™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vZThcc_ULTEM-JD7904-resin.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ULTEM™ JD7904 resin is a Polyether Imide (PEI) material. It is available in Asia Pacific. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.31 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.50 to 0.70 | % | Internal Method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 84.3 | MPa | Internal Method |
| Tensile Elongation (Break) | 4.0 | % | Internal Method |
| Flexural Modulus | 3730 | MPa | ASTM D790 |
| Flexural Strength | 128 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 29 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, 3.20 mm) | 200 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+10 | ohms | ASTM D257 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultra Low Outgassing™ SCV1-2590 | NuSil Technology | Silicone | Ultra Low Outgassing™ |
| Zytel® FGFE5171 NC010C | DuPont Performance Polymers | Nylon 66 | Zytel® |
| Clariant Nylon 6/6 PA-121G13 | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| Hytrel® HTR8609 BK320 | DuPont Performance Polymers | TPC-ET | Hytrel® |
| INEOS LDPE 20P430 | INEOS Olefins & Polymers Europe | LDPE | INEOS LDPE |
