Order Products : sales@su-jiao.com
Mytex® AS33LW
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Mytex Polymers |
| Trademark: | Mytex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vYE3xN_Mytex-AS33LW.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| AS33LW is a compounded, talc, and rubber modified polypropylene for exterior automotive applications. Material has outstanding moldability and excellent balance of high stiffness and good impact performance properties. Available in generic or customer speciflc pre-colored version with or without weathering and/or scratch additives. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.980 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 58 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 21.0 | MPa | ASTM D638 |
| Flexural Modulus - Tangent 2 | 1470 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 600 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 95.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ULTEM™ 2312EPR resin | SABIC Innovative Plastics | PEI | ULTEM™ |
| elitel UE3220 | UNITIKA Plastics Division | TPC-ET | elitel |
| LARIPUR® LPR 107-93A | COIM S.p.A. | TPU-Capro | LARIPUR® |
| PMC® 724 | Smooth-On, Inc | PUR, Unspecified | PMC® |
| ALTECH® PA6 ECO 2010/506 GF10 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
