Order Products : sales@su-jiao.com

DuPont™ Entira™ AS 500

Category:	Ionomer , Ionomer
Manufacturer:	DuPont Packaging & Industrial Polymers
Trademark:	DuPont™ Entira™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vTp6T9_DuPont-Entira-AS-500.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

DuPont™ Entira™ AS 500 is an extremely hygroscopic ionomer resin that is supplied as free-flowing pellets.

Uses:

Film

Industrial Applications

Packaging

Features

Entira™ AS 500 is used to lower the static decay time and surface resistivity of LDPE, LLDPE and other polymers.

Characteristics / Benefits:

Entira™ AS 500 can be precompounded or dry blended into polymers for extrusion, molding, or various other processing methods

Applications:

Antistatic agent for polyolefins and other polymers, in films, moldings and extruded forms

General Information
Additive	Antistatic property
Uses	Packaging Films Industrial application Mixing
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.00	g/cm³	ASTM D792, ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	8.0	g/10 min	ASTM D1238, ISO 1133

Thermal	Nominal Value	Unit	Test Method
Melting Temperature (DSC)	92.2	°C	ASTM D3418, ISO 3146

Additional Information	Nominal Value	Unit
Processing Temperature - Maximum	250	°C
General Processing Information: Entira™ AS 500 is a hygroscopic material. To minimize exposure to moisture, any remaining material should be hermetically sealed in a barrier package immediately after use, rmoving as much air from the package as possible. In order to reuse remaining material that has been hermetically sealed, the material should be dried under vacuum with a nitrogen flow at a maxium of 60C (140F) for several hours prior to use. Alternately use of a dessicated air drier with a dewpoint of the air at -40C (-40F) may be possible to use. Maximum air drying temp of 60C. Entira™ AS 500 is available in pellet form for use in conventional equipment for processing polyolefins. It can be fed together with base polymers and other additives in the hopper during processing. Typical addition levels range from 10% to 20%.

Resin Grade	Manufacturer	Category	Trademark
RTP 4200	RTP Company	PI, TP	RTP
REPOL® H100EY	Reliance Industries Limited	PP Homopolymer	REPOL®
CERTENE™ 709 SAN	Muehlstein	SAN	CERTENE™
Cheng Yu N6GV3	Cheng Yu Plastic Company Limited	Nylon 6	Cheng Yu
Polimid B AV V0M	Poliblend S.p.a.	Nylon 6	Polimid B