Order Products : sales@su-jiao.com
Vydyne® 75HF
| Category: | Nylon 66/6 , Polyamide 66/6 Copolymer |
| Manufacturer: | Ascend Performance Materials Operations LLC |
| Trademark: | Vydyne® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vT5DKg_Vydyne-75HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Vydyne 75HF is a medium-high-viscosity, heat-stabilized PA66/6 copolymer resin designed for extrusion applications. This product is available in natural only. It offers a well-balanced combination of engineering properties characterized by high melt point; high strength and rigidity; good toughness; soft hand and good chemical resistance. This resin is especially useful in applications where high elongation, good clarity in thin sections and soft feel are required. Typical Applications/End Uses: Typical uses include packaging films, monofilaments, bristles, and extruded profiles. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Density | 1.14 | -- | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | |||
| Saturated, 23°C | 8.5 | -- | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 2.5 | -- | % | ISO 62 |
| Mechanical | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Tensile Modulus (23°C) | 2700 | 500 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | |||
| Yield, 23°C | 80.0 | 25.0 | MPa | ISO 527-2 |
| Fracture, 23°C | 50.0 | 40.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield, 23°C) | 5.0 | 30 | % | ISO 527-2 |
| Nominal Tensile Strain at Break (23°C) | > 200 | > 200 | % | ISO 527-2 |
| Flexural Modulus (23°C) | 2200 | 250 | MPa | ISO 178 |
| Flexural Strength (23°C) | 70.0 | 8.00 | MPa | ISO 178 |
| Poisson's Ratio | 0.40 | -- | ISO 527-2 |
| Impact | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | |||
| -30°C | 8.0 | 6.0 | kJ/m² | ISO 179/1eA |
| 23°C | 4.0 kJ/m² | No Break | ISO 179/1eA | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | |||
| -30°C | No Break | No Break | ISO 179/1eU | |
| 23°C | No Break | No Break | ISO 179/1eU | |
| Notched Izod Impact | ISO 180 | |||
| -30°C | 8.0 | 6.0 | kJ/m² | ISO 180 |
| 23°C | 4.0 kJ/m² | No Break | ISO 180 |
| Thermal | Dry | Conditioned | Unit | Test Method |
|---|---|---|---|---|
| Heat Deflection Temperature | ||||
| 0.45 MPa, not annealed | 125 | -- | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 45.0 | -- | °C | ISO 75-2/A |
| Melting Temperature | 220 | -- | °C | ISO 11357-3 |
| Linear thermal expansion coefficient | ISO 11359-2 | |||
| Flow : 23 to 55°C, 2.00mm | 1.0E-4 | -- | cm/cm/°C | ISO 11359-2 |
| Lateral : 23 to 55°C, 2.00mm | 1.0E-4 | -- | cm/cm/°C | ISO 11359-2 |
| Extrusion | Dry | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 230 - 275 | °C | |
| Cylinder Zone 2 Temp. | 230 - 275 | °C | |
| Cylinder Zone 3 Temp. | 230 - 275 | °C | |
| Cylinder Zone 4 Temp. | 230 - 275 | °C | |
| Cylinder Zone 5 Temp. | 230 - 275 | °C | |
| Melt Temperature | 235 - 275 | °C | |
| Die Temperature | 240 | °C |
| Extrusion instructions |
|---|
| Recommended Extrusion Conditions:Melt Point: 220°CMelt Pressure: 3 to 17 MPaBlow Film Bath Temperature: 5°C to 20°CChill Roll Temperature (Cast Film): 20°C to 40°C (clear), 80°C to 100°C (high stable)Screw Design: General Purpose or Barrier |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Westlake LDPE EM182AA | Westlake Chemical Corporation | LDPE | Westlake LDPE |
| Mylar® A (300 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| HiFill FR® PA6 FR-N IM | Techmer Engineered Solutions | Nylon 6 | HiFill FR® |
| Lucent PC PC/PBT-1830 | Lucent Polymers, Inc. | PC+PBT | Lucent PC |
| TOTAL Polyethylene Bio TPSeal® 0850_05 | TOTAL Refining & Chemicals | mPE | TOTAL Polyethylene |
