Monprene® CP-13057G CLR Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene CP-13057G CLR is a very soft clear thermoplastic elastomer gel designed for a variety of consumer product applications. This grade exhibits high flow and is suitable for injection molding.

General Information
Features	Low Specific Gravity Without Fillers Low density High liquidity Soft Hardness, low
Uses	Safety equipment Sporting goods Stationery Consumer goods application field
Appearance	Clear/transparent
Forms	Particle
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.868	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (125°C/2.16 kg)	4.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	8	ASTM D2240
Shore OO, 5 seconds, injection molding	57	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress			ASTM D412
Transverse flow : 100% strain ¹	0.0965	MPa	ASTM D412
Flow : 100% strain ²	0.172	MPa	ASTM D412
Transverse flow : 300% strain ³	0.159	MPa	ASTM D412
Flow : 300% strain ⁴	0.414	MPa	ASTM D412
Tensile Strength ⁵			ASTM D412
Transverse flow : Fracture	2.23	MPa	ASTM D412
Flow : Fracture	1.88	MPa	ASTM D412
Tensile Elongation ⁶			ASTM D412
Transverse flow : Fracture	2100	%	ASTM D412
Flow : Fracture	790	%	ASTM D412
Tear Strength ⁷			ASTM D624
Transverse flow	8.23	kN/m	ASTM D624
Flow	5.60	kN/m	ASTM D624
Compression Set ⁸(23°C, 22 hr)	39	%	ASTM D395B

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries

Injection	Nominal Value	Unit
Rear Temperature	121 - 177	°C
Middle Temperature	127 - 182	°C
Front Temperature	132 - 188	°C
Nozzle Temperature	138 - 193	°C
Processing (Melt) Temp	138 - 193	°C
Mold Temperature	10.0 - 32.2	°C
Injection Pressure	1.38 - 5.52	MPa
Injection Rate	Fast
Back Pressure	0.172 - 0.689	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。

Note Message
1 .	Mouth die C, 510mm/min
2 .	Mouth die C, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	C mold, 510mm/min
6 .	Mouth die C, 510mm/min
7 .	C mold, 510mm/min
8 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	vSGzoR_Monprene-CP-13057G-CLR.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Spartech Polycom SA6010	Spartech Polycom	ABS	Spartech
HiFill® PA4/6 CF40 HS	Techmer Engineered Solutions	Nylon 46	HiFill®
Huafon HF-3065AP	Huafon Group Co., Ltd.	TPU-Polyester	Huafon
INEOS PP H07G-00	INEOS Olefins & Polymers USA	PP Homopolymer	INEOS PP
LEXAN™ 243R resin	SABIC Innovative Plastics	PC	LEXAN™