Order Products : sales@su-jiao.com
NYCOA Polyamide 7530 Nat
| Category: | Nylon 12 , Polyamide 12 |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vRhAEH_NYCOA-Polyamide-7530-Nat.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 7530 Nat is a heat stabilized Nylon 12 alloy that offers outstanding toughness, flexibility, and impact strength. It has been specially formulated to give resistance to zinc chloride and other automotive fluids. The material offers high resistance to moisture absorption. NYCOA 7530 Nat is suitable for both injection molding and extrusion. It exhibits outstanding processability, chemical resistance, good heat stability and an excellent balance of mechanical properties. This grade is available with custom additive packages: UV stabilizer, flame retardant and/or custom colors. Typical applications include high performance automotive tubing; air brakes, fuel lines and profile extrusion. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.01 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.34 | % | ASTM D570 |
| Saturation | 1.0 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 40.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 700 | % | ASTM D638 |
| Flexural Modulus 3 | 331 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | No fracture 820 J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 174 - 206 | °C |
| Additional Information |
|---|
| The value listed as Melting Point, was tested in accordance with ASTM D789.Tensile Elongation at Break, ASTM D638, 2 in/min: 700+% |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP 513MN40 | SABIC Americas, Inc. | PP Impact Copolymer | SABIC® PP |
| SUPREME HIPS SH 850 | Supreme Petrochem Ltd. | PS (HIPS) | SUPREME HIPS |
| Hanwha Total PP BI750 | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP Impact Copolymer | Hanwha Total PP |
| ESTOPLAST EP 2030NN21 | Ester Industries Ltd. | PBT | ESTOPLAST EP |
| Delas 185 | Shanghai Lin Gen Rubber Materials Co., Ltd. | PVC+NBR | Delas |
