Order Products : sales@su-jiao.com
ICORENE® 3560 AMBR
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | A. Schulman Europe |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vQGqIO_ICORENE3560AMBR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ICORENE® 3560 AMBR is a linear low density polyethylene antimicrobial grade specifically developed for rotational moulding. It contains a proven Antimicrobial additive developed with silver based technology. The grade is suitable for use in general purpose applications and has a good balance of properties such as toughness, easy flow and stiffness. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.935 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 100% Igepal) | 30.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 17.0 | MPa | ASTM D638 |
| Flexural Modulus | 650 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Drop Impact Resistance 1(-20°C) | 170 | J/cm | Internal method |
| Note Message | |
|---|---|
| 1 . | Based on ISO 6603 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VITAMIDE® PF1100W01 | Jackdaw Polymers | Nylon 6 | VITAMIDE® |
| VAMPSTYR 0023 V0 H | Vamp Tech | PS (GPPS) | VAMPSTYR |
| DURANEX® 601SA | Polyplastics Co., Ltd. | ABS+PBT | DURANEX® |
| Geon™ BIO RB7000 | PolyOne Corporation | PVC, Flexible | Geon™ BIO |
| Grilamid® XE 4108 nat | EMS-GRIVORY | Nylon 6/12 | Grilamid® |
