Order Products : sales@su-jiao.com
Spartech Polycom SCR1-5005F
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Spartech Polycom |
| Trademark: | Spartech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vN7G2b_Spartech-Polycom-SCR1-5005F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Spartech SCR1-5005F is a medium viscosity, ABS resin for injection molding that is approved by the FDA for use as a component in repeated food contact surface applications. It is heat stabilized and lubricated for good processing characteristics, and it exhibits good impact and chemical resistance. With the benefit of low moisture absorption, ABS can be used in a variety of environments. Being a very versatile product, SCR1-5005F can be used for industrial, transportation, sporting goods and electrical/electronic applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 9.5 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 41.4 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 2340 | MPa | ASTM D790 |
| Flexural Strength (Yield, 23°C) | 72.4 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 350 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 97.8 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.57 mm, NC) | HB | UL 94 |
| Additional Information |
|---|
| Melt Flow Rate, ASTM D1238: 8-11 g/10 min |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 87.8 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 210 - 240 | °C | |
| Middle Temperature | 215 - 245 | °C | |
| Front Temperature | 220 - 250 | °C | |
| Nozzle Temperature | 218 - 260 | °C | |
| Processing (Melt) Temp | 218 - 260 | °C | |
| Mold Temperature | 43.3 - 65.6 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PA 6.6 7600 FL HF | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| VESTAKEEP® Care M40G | Evonik Industries AG | PEEK | VESTAKEEP® Care |
| CP PRYME® Polycarbonate PC100RUL-18M BT Clear | Chase Plastics Services Inc. | PC | CP PRYME® Polycarbonate |
| DIALAC® KVS700 | UMG ABS, Ltd. | AES | DIALAC® |
| Elvaloy® HP441 | DuPont Packaging & Industrial Polymers | TP, Unspecified | Elvaloy® |
