Order Products : sales@su-jiao.com
UBE Nylon PAE1201U
| Category: | Nylon 12 Elast , Polyamide 12 Elastomer |
| Manufacturer: | UBE America, Inc. |
| Trademark: | UBE Nylon |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vLlZu1_UBE-Nylon-PAE1201U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UBE Nylon PAE1201U is a polyamide 12 elastomer (nylon 12 elastomer) material,. This product is available in North America,. The main feature of UBE Nylon PAE1201U is transparency. Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.00 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (235°C/2.16 kg) | 8.6 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 19.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 300 | % | ASTM D638 |
| Flexural Modulus (23°C) | 360 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 16.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 170 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 110 | °C | ASTM D648 |
| Melting Temperature | 165 | °C |
| Additional Information |
|---|
| The value listed as Melting Point was tested in accordance with ASTM D3418.Tensile Elongation at Break, ASTM D638, 23°C: >300% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Queo™ 8201 | Borealis AG | Plastomer | Queo™ |
| VisiJet® M3 Stoneplast | 3D Systems | Unspecified | VisiJet® |
| AKROMID® A3 GF 30 natural (2397) | AKRO-PLASTIC GmbH | Nylon 66 | AKROMID® |
| LNP™ LUBRICOMP™ CL001I compound | SABIC Innovative Plastics | PS (HIPS) | LNP™ LUBRICOMP™ |
| Durethan® BKV 40 000000 | LANXESS Corporation | Nylon 6 | Durethan® |
