Order Products : sales@su-jiao.com
SABIC® LDPE 2102TN32
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vKIKTM_SABIC-LDPE-2102TN32.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® LDPE 2102TN32 is a general purpose grade with a high level of anti block and slip agent (E=erucamide). This grade offers good optical properties and an excellent draw down ability. SABIC® LDPE 2102TN32 is suitable for packaging films for food and industrial goods and for lamination films. This grade is especially suitable when ultimate down gauging is required. The usual melt-2 film thickness can be reduced by 10-40%, maintaining an adequate CoF level. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.921 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.5 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 45 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction (Blown Film) | 0.20 | ASTM D1894 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-3 | ||
| MD : 25 µm, blown film | 190 | MPa | ISO 527-3 |
| TD : 25 µm, blown film | 190 | MPa | ISO 527-3 |
| Tensile Stress | ISO 527-3 | ||
| MD : Yield, 25 µm, blown film | 13.0 | MPa | ISO 527-3 |
| TD : Yield, 25 µm, blown film | 11.0 | MPa | ISO 527-3 |
| MD : 25 µm, blown film | 30.0 | MPa | ISO 527-3 |
| TD : 25 µm, blown film | 18.0 | MPa | ISO 527-3 |
| Tensile Elongation | ISO 527-3 | ||
| MD : Broken, 25 µm, blown film | > 100 | % | ISO 527-3 |
| TD : Broken, 25 µm, blown film | > 500 | % | ISO 527-3 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 90.0 | °C | ISO 306/A50 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze (25.0 µm, Blown Film) | 12 | % | ASTM D1003 |
| Additional Information |
|---|
| 25µm blown film processed with a blow up ratio of 3:1 and a die gap of 0.8 mm.Modulus of Elasticity, SABIC Method: 250 MPaMelting Point, SABIC Method, DSC: 108°CCrystallization Temperature, SABIC Method, DSC: 96°CAverage Heat of Fusion, SABIC Method, DSC: 108 J/gClarity, SABIC Method, Blown Film, 25µm: 30mVBlocking, SABIC Method, Blown Film: <5gRe-blocking, SABIC Method, Blown Film: 10gImpact Strength, ASTM D4272, 25µm, Blown Film: 20 kJ/mTear Strength, ISO 6383-2, 25µm, Blown Film, TD: 20 kN/mTear Strength, ISO 6383-2, 25µm, Blown Film, MD: 50 kN/m |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Taita PS 818 | Taita Chemical Company, Ltd. | PS (GPPS) | Taita PS |
| Vydyne® 63A | Ascend Performance Materials Operations LLC | Nylon 66 | Vydyne® |
| Alkathene® LD0128MS | Qenos Pty Ltd | LLDPE | Alkathene® |
| Exxtral™ Performance Polyolefin CNU012 | ExxonMobil Chemical | TPO | Exxtral™ Performance Polyolefin |
| DOMAMID® 6G20 | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
