Order Products : sales@su-jiao.com
Marlex® HMN TR-942
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Chevron Phillips Chemical Company LLC |
| Trademark: | Marlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vGpLlu_Marlex-HMN-TR-942.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Marlex® HMN TR-942 is a High Density Polyethylene material. It is available in Latin America or North America for rotational molding. Important attributes of Marlex® HMN TR-942 are:
Typical applications include:
|
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.943 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | ASTM D1693A | ||
| 10% Igepal, Compression Molded, F50 | 250 | hr | |
| 100% Igepal, Compression Molded, F50 | 700 | hr |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Compression Molded) | 61 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.17 mm, Rotational Molded) | 21.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, 3.17 mm, Rotational Molded) | 720 | % | ASTM D638 |
| Flexural Modulus 3 | ASTM D790 | ||
| 2% Secant : 3.17 mm, Rotational Molded | 720 | MPa | |
| Tangent : 3.17 mm, Rotational Molded | 860 | MPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| ARM Impact | |||
| -40°C, 3.20 mm | 92.0 | J | |
| -40°C, 6.35 mm | 244 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 3.17 mm, Rotational Molded | 64.0 | °C | |
| 1.8 MPa, Unannealed, 3.17 mm, Rotational Molded | 44.0 | °C | |
| Brittleness Temperature | -75.0 | °C | ASTM D746A |
| Vicat Softening Temperature | 120 | °C | ASTM D1525 4 |
| Peak Melting Temperature | 130 | °C | ASTM D3418 |
| Peak Crystallization Temperature (DSC) | 113 | °C | ASTM D3418 |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| 3 . | 13 mm/min |
| 4 . | Rate A (50°C/h), Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 305 TFE 13 SI 2 | RTP Company | PC | RTP |
| Moplen HP301R | LyondellBasell Industries | PP Homopolymer | Moplen |
| Gallonprene® GP520-5004 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| HiFill® PA4/6 GF5 IM HS BK | Techmer Engineered Solutions | Nylon 46 | HiFill® |
| Hostacom TRC 352N E1 G62514 | LyondellBasell Industries | PP Copolymer | Hostacom |
