Order Products : sales@su-jiao.com
Petrothene® Select GS710061
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Petrothene® Select |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vG28X3_Petrothene-Select-GS710061.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| The PETROTHENE SELECT series of resins are pelletized, high performance hexene, linear low density polyethylenes for applications requiring superior strength and toughness. These products offer significant improvements in mechanical properties and excellent additive homogeneity without sacrificing processability compared to conventional Hexene LLDPE materials. GS 710 exhibits superior processability compared to competitive High Performance Hexene LLDPE materials. Applications include trash and can liners, commercial and industrial packaging, as well as consumer packaging. The PETROTHENE SELECT series resins offer enhanced film strength, drawdown, toughness and heat seal strength. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| secant modulus | ASTM D882 | ||
| 1% secant, MD : 25 µm | 193 | MPa | ASTM D882 |
| 1% secant, TD : 25 µm | 200 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Break, 25 µm | 55.2 | MPa | ASTM D882 |
| TD : Break, 25 µm | 41.4 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 580 | % | ASTM D882 |
| TD : Break, 25 µm | 720 | % | ASTM D882 |
| Dart Drop Impact (25 µm, Blown Film) | 600 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 350 | g | ASTM D1922 |
| TD : 25 µm | 580 | g | ASTM D1922 |
| Additional Information |
|---|
| Film properties taken from blown film produced on a blown film line equipped with an 8 in diameter die and 100 mil die gap, running at 150 lb/hr and 420°F melt temperature.Density of Base Resin, ASTM D1505: 0.915 g/cm³Density of Compound, ASTM D1505: 0.924 g/cm³ |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 204 - 232 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8693-65 Clear 8355 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Diaterm® A27 GF30V0 | DTR S.r.l. (Develop Thermoplastic Resins) | Nylon 6 | Diaterm® |
| LNP™ THERMOCOMP™ RX04515H compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
| LONGLITE® PBT 7020-200X | CCP Group | PBT+ASA | LONGLITE® PBT |
| POCAN® TS 3221 901510 | LANXESS GmbH | PBT+PET | POCAN® |
