Order Products : sales@su-jiao.com
ProvaMed® TPE 1120
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | ACTEGA GmbH |
| Trademark: | ProvaMed® TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vFwrT6_ProvaMed-TPE-1120.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ProvaMed® TPE 1120 is a Thermoplastic Elastomer (TPE) material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for injection molding. Important attributes of ProvaMed® TPE 1120 are:
Typical application of ProvaMed® TPE 1120: Medical/Healthcare |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (160°C/2.16 kg) | 12 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 20 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 0.400 | MPa | DIN 53504 |
| Tensile Stress (Yield) | 1.30 | MPa | DIN 53504 |
| Tensile Elongation (Break) | 900 | % | DIN 53504 |
| Compression Set (23°C, 22 hr) | 17 | % | ISO 815 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature 1 | -65.0 | °C | DSC |
| Melting Temperature (DSC) 2 | 91.0 | °C | DSC |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 20.0 to 30.0 | °C | |
| Rear Temperature | 140 to 200 | °C | |
| Middle Temperature | 140 to 200 | °C | |
| Front Temperature | 140 to 200 | °C | |
| Nozzle Temperature | 170 to 210 | °C | |
| Mold Temperature | 20.0 to 60.0 | °C |
| Note Message | |
|---|---|
| 1 . | Heating rate 10 K/minMelting peak from second heating cycle |
| 2 . | Heating rate 10 K/minMelting peak from second heating cycle |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 203A MS | RTP Company | Nylon 6 | RTP |
| Sarlink® TPV X4765B42 | Teknor Apex Company | TPV | Sarlink® TPV |
| CELEX™ 5200HF | Trinseo | PC | CELEX™ |
| Extreme™ D | Spartech Plastics | TPO | Extreme™ |
| LNP™ LUBRICOMP™ DL003E compound | SABIC Innovative Plastics | PC | LNP™ LUBRICOMP™ |
