Order Products : sales@su-jiao.com
YUCLAIR® FT811
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | SK Global Chemical |
| Trademark: | YUCLAIR® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vBiNuY_YUCLAIR-FT811.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
YUCLAIR FT811 is octene-1 copolymer designed for use in diaper film and casting type packaging film application. YUCLAIR FT811 provides stronger film than ones made from competitive LLDPE film grades. Therefore YUCLAIR FT811 shows superior stiffness, tensile strength, gel-free, and processibility. YUCLAIR FT811 can be processed readily into casting film using standard extrusion techniques. YUCLAIR FT811 complies with FDA regulations in 21 CFR177.1520 for all food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.932 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.7 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 30 | µm | ASTM D746 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 30 µm | 14.7 | MPa | ASTM D882 |
| TD : Yield, 30 µm | 14.7 | MPa | ASTM D882 |
| MD : Break, 30 µm | 45.1 | MPa | ASTM D882 |
| TD : Break, 30 µm | 42.2 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 30 µm | 740 | % | ASTM D882 |
| TD : Break, 30 µm | 810 | % | ASTM D882 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 30 µm | 180 | g | ASTM D1922 |
| TD : 30 µm | 240 | g | ASTM D1922 |
| Spencer Impact (30.0 µm) | 0.490 | J | ASTM D3420 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -80.0 | °C | ASTM D746 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 6.5 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 | °C | |
| Cylinder Zone 3 Temp. | 230 | °C | |
| Cylinder Zone 5 Temp. | 230 | °C | |
| Die Temperature | 230 | °C |
| Extrusion instructions |
|---|
| Film Extrusion Condition: Screw dia 50, Die width 450Die gap 0.8, Screw RPM 31, L/S 7 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ PC 9005 L | TER HELL PLASTIC GMBH | PC | TEREZ PC |
| Addisil™ IND 1070 E | Momentive Performance Materials Inc. | Rubber | Addisil™ |
| Fainplast PVC KL 52/1 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| KYDEX® XD | SEKISUI Polymer Innovations, LLC | PMMA+PVC | KYDEX® |
| TOLEN H253 FF/2 | SIBUR | PP Homopolymer | TOLEN |
