Order Products : sales@su-jiao.com
Lastilac AR G/17-V0E
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | LATI S.p.A. |
| Trademark: | Lastilac |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vAQ4p2_Lastilac-AR-G-17-V0E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Acrylonitrile-Butadiene-Styrene copolymer (ABS) based compound. Glass fibres. UL94 V-0 classified, with brominated flame retardants, PBB/PBDE free. Very high dimensional stability. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.40 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | ||
| Across Flow : 2.00 mm | 0.40 to 0.60 | % | |
| Flow : 2.00 mm | 0.30 to 0.50 | % | |
| Water Absorption (23°C, 24 hr) | 0.030 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-2/1 | ||
| 23°C | 4700 | MPa | |
| 60°C | 3900 | MPa | |
| 90°C | 2900 | MPa | |
| Tensile Stress | ISO 527-2/5 | ||
| Yield, 90°C | 15.0 | MPa | |
| Break, 23°C | 35.0 | MPa | |
| Break, 60°C | 15.0 | MPa | |
| Break, 90°C | 8.00 | MPa | |
| Tensile Strain | ISO 527-2/5 | ||
| Yield, 90°C | 1.0 | % | |
| Break, 23°C | 1.5 | % | |
| Break, 60°C | 1.5 | % | |
| Break, 90°C | 15 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20°C | 2.0 | kJ/m² | |
| 23°C | 5.0 | kJ/m² | |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -20°C | 10 | kJ/m² | |
| 23°C | 8.0 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 100 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 95.0 | °C | ISO 75-2/A |
| Continuous Use Temperature 2 | 70.0 | °C | |
| Vicat Softening Temperature | 85.0 | °C | ISO 306/B50 |
| CLTE - Flow (30 to 100°C) | 2.5E-5 | cm/cm/°C | ISO 11359-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Comparative Tracking Index (Solution A) | 325 | V | IEC 60112 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.750 mm | V-1 | ||
| 1.50 mm | V-0 | ||
| 3.00 mm | V-0 | ||
| Glow Wire Flammability Index | IEC 60695-2-12 | ||
| 1.00 mm | 960 | °C | |
| 2.00 mm | 960 | °C | |
| Glow Wire Ignition Temperature | IEC 60695-2-13 | ||
| 1.00 mm | 775 | °C | |
| 2.00 mm | 800 | °C | |
| Oxygen Index | 36 | % | ASTM D2863 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Dimensional Stability | 49.0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 to 80.0 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 190 to 230 | °C | |
| Mold Temperature | 50.0 to 70.0 | °C | |
| Injection Rate | Moderate |
| Note Message | |
|---|---|
| 1 . | 60 MPa |
| 2 . | 20,000 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1003 GB 20 TFE 15 | RTP Company | PBT | RTP |
| RTP 108CC | RTP Company | PP, Unspecified | RTP |
| Axiall PVC 50897 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Hostacom TKC 285N G22361 | LyondellBasell Industries | PP Copolymer | Hostacom |
| Moplen EP640R | PolyMirae | PP Impact Copolymer | Moplen |
