Order Products : sales@su-jiao.com
ASI POLYPROPYLENE 1498-01
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ASI POLYPROPYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | vA3uVA_ASI-POLYPROPYLENE-1498-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PP 1498-01 is a high flow medium impact copolymer polypropylene. It molds easily at low temperatures, pressures and mold cycle times. It meets the requirements of Ford Specification ESB-M4D500AB and is available in Ford Motor Company interior trim colors. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.908 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 16 to 24 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 70 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 21.4 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 10 | % | ASTM D638 |
| Flexural Modulus | 896 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 110 | J/m | ASTM D256 |
| Unnotched Izod Impact | No Break | ASTM D256 | |
| Gardner Impact (-29°C) | 5.88 | J | |
| Gardner Impact | 21.0 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 83.9 | °C | |
| 1.8 MPa, Unannealed | 52.2 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wellamid® MRGF25/25 22H-NBK1 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| NILENE® P15 K40C | Taro Plast S.p.A. | PP Homopolymer | NILENE® |
| DAI-EL™ T-530 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| Magnobond 6155 | Magnolia Plastics, Inc. | Epoxy | Magnobond |
| POLYCASA® XT 630 | Polycasa | Acrylic (PMMA) | POLYCASA® |
