Order Products : sales@su-jiao.com
HIDEN® P502
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | YUHWA Korea Petrochemical Ind. Co., Ltd. |
| Trademark: | HIDEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | v7xwYK_HIDEN-P502.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
HIDEN® P502 is a High Density Polyethylene material. It is available in Asia Pacific. Important attributes of HIDEN® P502 are:
Typical application of HIDEN® P502: Plumbing/Piping/Potable Water |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.939 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.15 | g/10 min | ASTM D1238 |
| Water Absorption (Equilibrium) | < 0.010 | % | ASTM D570 |
| Environmental Stress-Cracking Resistance 1(Condition B) | > 5000 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 58 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 19.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 600 | % | ASTM D638 |
| Flexural Modulus | 588 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | > 490 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 57.0 | °C | ASTM D648 |
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 120 | °C | ASTM D1525 |
| Peak Melting Temperature | 130 | °C | ASTM D3418 |
| CLTE - Flow | 1.5E-4 | cm/cm/°C | ASTM D696 |
| Oxidation Induction Time (200°C) | > 40 | min | ASTM D3895 |
| Note Message | |
|---|---|
| 1 . | 100% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UNIPA® Ld | Nytef Plastics, Ltd. | Nylon 66 | UNIPA® |
| CYCOLAC™ DL100LG resin | SABIC Innovative Plastics Europe | ABS | CYCOLAC™ |
| ELASTOSIL® R 770/75 | Wacker Chemie AG | Silicone | ELASTOSIL® R |
| Sylvin 7833-80 Orange 5107 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Rotuba CAP CP801 (9% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
