Order Products : sales@su-jiao.com
Glasrod MTS
| Category: | Polyester, TS , Thermoset Polyester |
| Manufacturer: | Glastic Corporation |
| Trademark: | Glasrod |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | v7b9y7_Glasrod-MTS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Glasrod MTS is a solid rod and bar fiberglass-reinforced thermoset polyester shape that exhibits properties desirable for a wide range of structural and electrical applications. Most economical system for electrical use; designed for 155°C service. 50,000 psi tensile and 80,000 psi flexural strength. Available in Rectangular, Square, "A" and Dogbone shapes. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.00 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 0.25 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 1.38E+6 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 345 | MPa | ASTM D638 |
| Flexural Modulus | 20700 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 552 | MPa | ASTM D790 |
| Shear Strength | 13.8 | MPa | ASTM D732 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 2100 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 9.0E-6 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.29 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (25.4 mm, in Oil) | 2.8 | kV/mm | ASTM D149 |
| Dielectric Constant (60 Hz) | 5.00 | ASTM D150 | |
| Arc Resistance | 130 | sec | ASTM D495 |
| Additional Information |
|---|
| The value listed as Shear Strength ASTM D732 was tested in acordance with ASTM D3914.Insulation Resistance, ASTM D257: 8.3e11 ohmsCompressive Strength, ASTM D695, Axial: 40000 psiCompressive Strength, ASTM D695, Transverse: 14000 psi |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SAUDPOL SP-351-BV13 | Gulf Chemicals and Industrial Oils Company | Polyester, TS | SAUDPOL |
| Nypol® PA A3 ST HS UV5 PRTA011 NR427 | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
| LEXAN™ RCX7243 resin | SABIC Innovative Plastics Asia Pacific | PC | LEXAN™ |
| Medalist® MD-50293 | Teknor Apex Company | TPE | Medalist™ |
| LNP™ LUBRILOY™ D2000I compound | SABIC Innovative Plastics | PC | LNP™ LUBRILOY™ |
