| Category: | Acrylic (PMMA) , Polymethyl Methacrylate Acrylic |
| Manufacturer: | Lucite International Holland BV |
| Trademark: | Elvakon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | v75PbI_Elvakon4453.pdf |
| PRICE: | Order Products email sales@su-jiao.com |
| Message |
|---|
| Low gloss acrylic capstock Lucite® Elvakon® 4453 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.15 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 1.5 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 46.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 6.0 | % | ISO 527-2 |
| Flexural Modulus | 3200 | MPa | ISO 178 |
| Flexural Stress | 74.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 2.6 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | 26 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact | 2.4 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 103 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 98.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 113 | °C | ISO 306/A |
| -- | 99.0 | °C | ISO 306/B |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gloss (60°) | 10 - 15 | Internal method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROMID A 280 Z4 | Taro Plast S.p.A. | Nylon 66 | TAROMID A |
| ETILINAS BPD 4045 | POLYETHYLENE MALAYSIA SDN BHD | HDPE | ETILINAS |
| GETILAN GPE/400 M | Crosspolimeri S.p.A. | XLPE | GETILAN |
| EPITEC® PC-6910F | Osterman & Company | PC | EPITEC® |
| Sylvin 8948-70 Red 654 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |