RTP 3401-3

Category: LCP , Liquid Crystal Polymer
Manufacturer: RTP Company
Trademark: RTP
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: v6VeU3_RTP-3401-3.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Glass Fiber
General Information
Filler / Reinforcement
  • Glass fiber reinforced material, 10% filler by weight
RoHS Compliance
  • Contact manufacturer
Processing Method
  • Injection molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.48g/cm³ASTM D792
Molding Shrinkage - Flow (3.20 mm)0.30%ASTM D955
MechanicalNominal ValueUnitTest Method
Tensile Modulus 11400MPaASTM D638
Tensile Strength 162MPaASTM D638
Tensile Elongation (Yield)2.0 - 3.0%ASTM D638
Flexural Modulus 10000MPaASTM D790
Flexural Strength 186MPaASTM D790
ImpactNominal ValueUnitTest Method
Notched Izod Impact (3.20 mm)160J/mASTM D256
Unnotched Izod Impact (3.20 mm)530J/mASTM D4812
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)266°CASTM D648
Additional InformationNominal ValueUnit
Primary Additive 10%
InjectionNominal ValueUnit
Drying Temperature 149°C
Drying Time 8.0hr
Dew Point -28.9°C
Processing (Melt) Temp 332 - 366°C
Mold Temperature 65.6 - 121°C
Injection Pressure 82.7 - 124MPa
Injection instructions
The key to successfully molding this material is to start mold open cycles as soon as the screw reaches its retracted position.
Resin Grade Manufacturer Category Trademark
Rilsan® AZMO 23 T6L Arkema Nylon 12 Rilsan®
TEKNIFLEX® PXA 12200 Tekni-Films, a div of Tekni-Plex Film, Copolyester/PCTFE TEKNIFLEX®
EZPrene 9080A ENPLAST Americas, a Ravago Group Company TPV EZPrene
HiFill® PA6/6 GF55 HS L Techmer Engineered Solutions Nylon 66 HiFill®
Zetpol® 4300 Zeon Corporation NBR Zetpol®