Order Products : sales@su-jiao.com
RTP 1305 UP
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | v2lF0d_RTP-1305-UP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
"Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade." |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.58 | g/cm³ | ISO 1183 |
| Moisture Content | 0.040 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Primary Additive | 30 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 13000 | MPa | ISO 527-2 |
| Tensile Stress | 180 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 2.4 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 12500 | MPa | ISO 178 |
| Flexural Stress (Injection Molded) | 270 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 1(Injection Molded) | 8.0 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength 2(Injection Molded) | 55 | kJ/m² | ISO 180/1U |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Data listed is for natural or black colored materials. Pigments can affect properties. |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 150 | °C | |
| Drying Time | 6.0 | hr | |
| Dew Point | -25.0 | °C | |
| Processing (Melt) Temp | 305 - 330 | °C | |
| Mold Temperature | 135 - 175 | °C | |
| Injection Pressure | 70.0 - 105 | MPa |
| Note Message | |
|---|---|
| 1 . | 4mm thickness |
| 2 . | 4mm thickness |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 205 A TFE 15 UV | RTP Company | Nylon 6 | RTP |
| THERMOLAST® K TC6CSN (Series: CS) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Badadur® PBT8 TM-Z3 | Bada AG | PBT | Badadur® |
| Aristech ALTAIR PLUS® (0.160 inch) | Aristech Acrylics LLC | ABS+Acrylic | Aristech |
| SD POLYCA™ SD2201W | Sumika Styron Polycarbonate Limited | PC | SD POLYCA™ |
