Category: | LLDPE , Linear Low Density Polyethylene |
Manufacturer: | Haldia Petrochemicals Ltd. |
Trademark: | Halene L |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | v1ggsd_Halene-L-LLT12.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
LL T12 is a 1-butene based LLDPE grade produced by the Spherilene Technology. LL T12 can be used for Low Voltage power cable insulation, using silane-crosslinking process. This is a barefoot grade and has to be suitably additivated for end use requirements. The precise morphological control achieved during polymerization confers superior processability and improved performance properties. |
General Information | |
---|---|
Features |
|
Uses |
|
Forms |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density 1 | 0.926 | g/cm³ | ASTM D1505 |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.7 | g/10 min | ASTM D1238 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Strength 2(Break, Compression Molded) | 20.0 | MPa | ASTM D638 |
Tensile Elongation 3(Break, Compression Molded) | 1000 | % | ASTM D638 |
Flexural Modulus | 550 | MPa | ASTM D790 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact (23°C, Compression Molded) | 500 | J/m | ASTM D256A |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Peak Melting Temperature | 128 | °C | ASTM D3418 |
Note Message | |
---|---|
1 . | 23°C |
2 . | Type IV |
3 . | Type IV |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
XYRON™ 240Z | Asahi Kasei Chemicals Corporation | PPE+PS | XYRON™ |
AMPLIFY™ TY 1351 | The Dow Chemical Company | MAH-g | AMPLIFY™ TY |
BULKSAM® UT30B | UMG ABS, Ltd. | ABS | BULKSAM® |
EOS PA 2201 | EOS GmbH | Nylon 12 | EOS |
Hifax ERC 347P G14008 | LyondellBasell Industries | PP Copolymer | Hifax |