Order Products : sales@su-jiao.com
Generic PUR-Eth,aliphat
| Category: | PUR-Eth,aliphat , Polyurethane (Polyether, Aliphatic) |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | v1Qzgg_Generic-PUR-Eth-aliphat.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PUR-Eth,aliphat This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 to 1.07 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 44 to 97 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain, 23°C | 1.72 to 14.5 | MPa | |
| 300% Strain, 23°C | 2.76 to 34.7 | MPa | |
| Tensile Strength (Yield, 23°C) | 20.7 to 46.5 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 180 to 850 | % | ASTM D412 |
| Tear Strength (23°C) | 28.9 to 102 | kN/m | ASTM D624 |
| Compression Set | 39 to 66 | % | ASTM D395 |
| Bayshore Resilience | 40 to 50 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pot Life (23°C) | 1.5 to 6.1 | min | |
| Thermoset Mix Viscosity | 931 to 1000 | cP | ASTM D2393 |
| Demold Time | 20 to 960 | min | |
| Post Cure Time | 16 to 72 | hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ad-Tech Epoxy EL-324-1 | Ad-Tech Plastic Systems Corp. | Epoxy | Ad-Tech Epoxy |
| Apec® DP1-9354 | Covestro - Polycarbonates | PC | Apec® |
| ARK 2150-50A | Arkadia Plastics, Inc. | TPU, Unspecified | ARK |
| Comai 600-2 BL | Comai Ltda | PP Homopolymer | Comai |
| PETLIN LD M022X | PETLIN (MALAYSIA) SDN BHD | LDPE | PETLIN |
