Order Products : sales@su-jiao.com
RELENE® 16MA400
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Reliance Industries Limited |
| Trademark: | RELENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uyMiyf_RELENE-16MA400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 16MA400 is an injection moulding grade film grade Low Density Polyethylene (LDPE) produced by high pressure tubular process. The high melt flow index makes it ideal for moulding of very thin, intricate and large items having adequate mechanical properties. This grade is also an ideal choice for making masterbatches with higher loading. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 10.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 40 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 140 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Injection Molded) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 84.0 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X3569 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Teflon® FEP 9835 | DuPont Fluoropolymers | FEP | Teflon® FEP |
| Stanyl® Diablo OCD2305 BM (NC214) | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Fainplast PVC KL 52/1 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| EPT 3072E | Mitsui Chemicals, Inc. | EPDM | EPT |
