Order Products : sales@su-jiao.com
Alpha PVC 2212C2B/H-118 CLEAR 0003
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | AlphaGary |
| Trademark: | Alpha PVC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uwvUhK_Alpha-PVC-2212C2B-H-118-CLEAR-0003.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 2212C2B/H-118 CLEAR 0003 is a non-toxic, high flow, rigid PVC compound primarily designed for injection molding of biomedical devices. This compound provides excellent thermal stability for easy processing into medical devices such as fistulas, luers, clamps, hubs, connectors, drip chambers, etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 - 1.33 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 23 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec, 6.35 mm) | 74 - 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2600 | MPa | ASTM D638 |
| Tensile Strength (1.91 mm) | 45.9 | MPa | ASTM D638 |
| Flexural Modulus (3.18 mm) | 2420 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 69.6 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 660 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 63.6 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | V-0 | UL 94 | |
| 3.00 mm | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 149 | °C | |
| Middle Temperature | 160 | °C | |
| Front Temperature | 166 | °C | |
| Nozzle Temperature | 177 | °C | |
| Processing (Melt) Temp | 177 - 182 | °C |
| Injection instructions |
|---|
| Zone 4: 340°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP GP2301 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| TEREZ PA 6 7500 GF 30 FL HF /2 | TER HELL PLASTIC GMBH | Nylon 6 | TEREZ PA 6 |
| Gallonprene® GP210-3511 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Infino VB-5305G | SAMSUNG SDI CO., LTD. | PBT | Infino |
| LOXIM 315 01 V0 | LOXIM Industries Private Limited | Nylon 6 | LOXIM |
