Order Products : sales@su-jiao.com

Crastin® ST830FRUV NC010

Category:	PBT , THERMOPLASTIC POLYESTER RESIN
Manufacturer:	DuPont Performance Polymers
Trademark:	Crastin®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	uvtgnF_CrastinST830FRUVNC010.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
Unreinforced, Flame Retardant, UV Stabilized, Polybutylene Terephthalate

General Information
Additive	UV stabilizer Flame retardancy
Features	UV Stabilized Flame retardancy
RoHS Compliance	Contact manufacturer
Processing Method	Injection molding
Multi-Point Data	Isothermal Stress vs. Strain (ISO 11403-1) Secant Modulus vs. Strain (ISO 11403-1)
Part Marking Code (ISO 11469)	>PBT-HIFR(17)
Resin ID (ISO 1043)	PBT-HIFR(17)

Physical	Nominal Value	Unit	Test Method
Density	1.37	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (250°C/5.0 kg)	3.0	g/10 min	ISO 1133
Molding Shrinkage			ISO 294-4
Transverse flow	1.6	%	ISO 294-4
Flow	2.0	%	ISO 294-4

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	2200	MPa	ISO 527-2
Tensile Stress (Yield)	41.0	MPa	ISO 527-2
Tensile Strain (Yield)	9.0	%	ISO 527-2
Nominal Tensile Strain at Break	45	%	ISO 527-2
Flexural Modulus	2100	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-40°C	10	kJ/m²	ISO 179/1eA
-30°C	10	kJ/m²	ISO 179/1eA
23°C	65	kJ/m²	ISO 179/1eA
Charpy Unnotched Impact Strength			ISO 179/1eU
-40°C	350	kJ/m²	ISO 179/1eU
-30°C	350	kJ/m²	ISO 179/1eU
23°C	No Break		ISO 179/1eU
Notched Izod Impact			ISO 180/1A
-40°C	10	kJ/m²	ISO 180/1A
-30°C	10	kJ/m²	ISO 180/1A
23°C	70	kJ/m²	ISO 180/1A
Unnotched Izod Impact Strength			ISO 180/1U
-40°C	220	kJ/m²	ISO 180/1U
-30°C	220	kJ/m²	ISO 180/1U
23°C	No Break		ISO 180/1U

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
0.45 MPa, not annealed	125	°C	ISO 75-2/B
1.8 MPa, not annealed	55.0	°C	ISO 75-2/A
Melting Temperature ¹	225	°C	ISO 11357-3
Linear thermal expansion coefficient			ISO 11359-2
Flow	1.9E-4	cm/cm/°C	ISO 11359-2
Lateral	1.9E-4	cm/cm/°C	ISO 11359-2

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+14	ohms	IEC 60093
Volume Resistivity	> 1.0E+15	ohms·cm	IEC 60093
Dielectric Strength	36	kV/mm	IEC 60243-1
Relative Permittivity			IEC 60250
100 Hz	3.50		IEC 60250
1 MHz	3.40		IEC 60250
Dissipation Factor			IEC 60250
100 Hz	1.1E-3		IEC 60250
1 MHz	0.024		IEC 60250
Comparative Tracking Index	600	V	IEC 60112

Flammability	Nominal Value	Unit	Test Method
Flame Rating			UL 94, IEC 60695-11-10, -20
0.9 mm	V-0		UL 94, IEC 60695-11-10, -20
1.5 mm	V-0		UL 94, IEC 60695-11-10, -20
Oxygen Index	27	%	ISO 4589-2
FMVSS Flammability	DNI		FMVSS 302

Injection	Nominal Value	Unit
Melt Temperature, Optimum	250	°C
Mold Temperature, Optimum	80	°C
Back Pressure	As low as possible
Drying Recommended	yes
Hold Pressure Time	3.00	s/mm

Fill Analysis	Nominal Value	Unit
Melt Density	1.17	g/cm³
Ejection Temperature	170	°C

Injection	Nominal Value	Unit
Drying Temperature	120	°C
Drying Time - Desiccant Dryer	2.0 - 4.0	hr
Suggested Max Moisture	0.040	%
Processing (Melt) Temp	240 - 260	°C
Mold Temperature	30 - 130	°C
Holding Pressure	60.0	MPa

Note Message
1 .	10°C/min

Resin Grade	Manufacturer	Category	Trademark
DOW™ LDPE 5005	The Dow Chemical Company	LDPE	DOW™ LDPE
EXCELINK 1700B	JSR Corporation	TPV	EXCELINK
Ferro PP TPP25AP93BK	Ferro Corporation	PP Copolymer	Ferro PP
Electrafil® PP TM10 BK	Techmer Engineered Solutions	PP, Unspecified	Electrafil®
Lupolen 3020 F	LyondellBasell Industries	LDPE	Lupolen