Order Products : sales@su-jiao.com
FRAGOM PR/721
| Category: | Polyolefin, Unspecified , Polyolefin |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uvGmmu_FRAGOM-PR-721.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM PR PR/720 is the trade-mark of our flame retardant polyolefinic compounds. FRAGOM PR PR/720 is a halogen-free flame-retardant polyolefinic thermoplastic compound with high values of temperature index and oxygen index, very easy to process and suitable for cable sheathing. The compound was developed to use in sheathing extrusion expecially when the thikness is important (1,8-2,4 mm) Certify: CEI 2011 M1,VDE 0207 HM2,BS 7655 LTS1-LTS3 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.51 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | |||
| 190°C/21.6 kg | 20 | g/10 min | ASTM D1238 |
| 280°C/0.325 kg | 6.0 | g/10 min | IEC 60811 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 46 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | > 13.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | 190 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (100°C, 168 hr) | 5.0 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (100°C, 168 hr) | -14 | % | IEC 60811 |
| Change in Tensile Strength (70°C, 4 hr, in SAE 20 Oil) | < 15 | % | IEC 60811 |
| Change in Tensile Strain at Break (70°C, 4 hr, in SAE 20 Oil) | < 10 | % | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Pressure Test - Penetration 1(80°C) | % | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | % | IEC 60754-1 | |
| Oxygen Index | 40 | % | ASTM D2863 |
| Additional Information |
|---|
| No detrimental effects on properties and capability of FRAGOM in presence of Masterbatch colours, black included.We suggest to dry masterbatch before using. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 90.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Cylinder Zone 1 Temp. | 120 | °C | |
| Cylinder Zone 2 Temp. | 135 | °C | |
| Cylinder Zone 3 Temp. | 150 | °C | |
| Cylinder Zone 4 Temp. | 160 | °C | |
| Cylinder Zone 5 Temp. | 165 | °C | |
| Die Temperature | 175 | °C |
| Note Message | |
|---|---|
| 1 . | K=0.6, 4 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRIMALLOY® B1700 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | PRIMALLOY® |
| GPPC ABS D-1000A | GPPC Chemical Co., Ltd. | ABS | GPPC ABS |
| Eltex® P CAP912 | INEOS Olefins & Polymers Europe | PP Random Copolymer | Eltex® P |
| EL-Lene™ H5211PBL | SCG Chemicals Co., Ltd. | HDPE | EL-Lene™ |
| HiFill® MD PA66 0125 LE | Techmer Engineered Solutions | Nylon 66 | HiFill® |
