Order Products : sales@su-jiao.com

ShinkoLite-P UT-200

Category:	Acrylic (PMMA) , Polymethyl Methacrylate Acrylic
Manufacturer:	Mitsubishi Rayon America Inc.
Trademark:	ShinkoLite-P
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	uugiG0_ShinkoLite-P-UT-200.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

ShinkoLite-P UT-200 is a Polymethyl Methacrylate Acrylic material. It is available in North America for extrusion or injection molding.

Important attributes of ShinkoLite-P UT-200 are:

Low to No Odor/Taste

Chemical Resistant

Good Dimensional Stability

Good Processability

Good Weather Resistance

Typical applications include:

Automotive

Engineering/Industrial Parts

Hose/Tubing

General Information
Features	Good Chemical Resistance Good Dimensional Stability Good Flow Good Impact Resistance Good Moldability Good Weather Resistance High Gloss High Heat Resistance Low to No Odor Low to No Taste
Uses	Rods Tubing
Appearance	Clear/Transparent
Forms	Pellets
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.19	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/10.0 kg)	2.4	g/10 min	ASTM D1238
Molding Shrinkage - Flow	0.20 to 0.50	%	ASTM D955
Water Absorption (24 hr)	1.8	%	ASTM D570

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	101		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	76.6	MPa	ASTM D638
Tensile Elongation (Break)	5.0	%	ASTM D638
Flexural Modulus	3190	MPa	ASTM D790
Flexural Strength (Yield)	118	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	15	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	115	°C	ASTM D648

Optical	Nominal Value	Unit	Test Method
Refractive Index	1.500		ASTM D542
Transmittance	93.0	%	ASTM D1003
Haze	0.30	%	ASTM D1003

Injection	Nominal Value	Unit
Drying Temperature	80.0 to 90.0	°C
Drying Time	4.0 to 6.0	hr
Rear Temperature	240 to 270	°C
Middle Temperature	240 to 270	°C
Front Temperature	240 to 270	°C
Mold Temperature	70.0 to 100	°C
Injection Pressure	78.3 to 138	MPa

Resin Grade	Manufacturer	Category	Trademark
Amilan® CM1001R	Toray Resin Company	Nylon 6	Amilan®
ELASTOSIL® E 4	Wacker Chemie AG	Silicone	ELASTOSIL® E
OxyVinyls® 225P	OxyVinyls, LP	PVC Homopolymer	OxyVinyls®
SABIC® SUPEER™ 8112L	Saudi Basic Industries Corporation (SABIC)	mLLDPE	SABIC® SUPEER™
TECACOMP® PEEK TRM PVX black 4007	Ensinger GmbH	PEEK	TECACOMP®