Shin-Etsu Elastomer KE-2090-20A/B

Category: Silicone Rubber, HTV , Silicone Rubber, HTV
Manufacturer: Shin-Etsu Silicones of America
Trademark: Shin-Etsu Elastomer
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: utzYU0_Shin-Etsu-Elastomer-KE-2090-20A-B.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Shin-Etsu KE-2090-20 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2090-20 is low enough to allow easy pumping through most injection molding systems.
General Information
Features
  • Low viscosity
  • Workability, good
Processing Method
  • Liquid Injection Molding (LIM)
PhysicalNominal ValueUnit
Specific Gravity 1.07g/cm³
HardnessNominal ValueUnit
Durometer Hardness 21
ElastomersNominal ValueUnit
Tensile Strength 7.24MPa
Tensile Elongation (Break)970%
Tear Strength 16.13kN/m
ThermosetNominal ValueUnit
Shelf Life (32°C)26wk
Additional Information
Press / Post Cure: Press
Uncured PropertiesNominal ValueUnit
Curing Time 0.25hr
Note Message
1 .B mould
Resin Grade Manufacturer Category Trademark
Bormed™ DM55 pharm Borealis AG PP Homopolymer Bormed™
ICORENE® 1050 ICO Polymers EMEA, A Division of A. Schulman HDPE ICORENE®
Polifor® 20 BS/25 AS-UV NATURALE SO.F.TER. SPA PP Homopolymer Polifor®
PENTAMID A GV30 H LS natural PENTAC Polymer GmbH Nylon 66 PENTAMID A
Dow Corning® MG-2401 Dow Corning Corporation Silicone Dow Corning®