Order Products : sales@su-jiao.com
Generic mLLDPE
| Category: | mLLDPE , Metallocene Linear Low Density Polyethylene |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | utg2Gf_Generic-mLLDPE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic mLLDPE This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | |||
| 23°C | 0.918 - 0.926 | g/cm³ | ISO 1183 |
| -- | 0.916 - 0.918 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | |||
| 190°C/2.16 kg | 1.0 - 1.5 | g/10 min | ASTM D1238 |
| 190°C/0.325 kg | 1.2 - 2.0 | g/10 min | ISO 1133 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 19 - 50 | µm | |
| secant modulus | |||
| MD | 151 - 191 | MPa | ASTM D882 |
| TD | 124 - 208 | MPa | ASTM D882 |
| 23°C | 117 - 270 | MPa | ISO 527-3 |
| Tensile Strength | |||
| MD : Yield | 8.96 - 13.6 | MPa | ASTM D882 |
| TD : Yield | 9.42 - 11.1 | MPa | ASTM D882 |
| Yield, 23°C | 9.00 - 13.0 | MPa | ISO 527-3 |
| MD : Fracture | 45.4 - 67.6 | MPa | ASTM D882 |
| TD : Fracture | 31.7 - 59.3 | MPa | ASTM D882 |
| Fracture, 23°C | 48.9 - 65.4 | MPa | ISO 527-3 |
| Tensile Elongation | |||
| MD : Fracture | 440 - 490 | % | ASTM D882 |
| TD : Fracture | 540 - 600 | % | ASTM D882 |
| Fracture, 23°C | 540 - 700 | % | ISO 527-3 |
| Dart Drop Impact (23°C) | 200 - 1100 | g | ASTM D1709 |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 140 - 240 | g | ASTM D1922 |
| TD | 260 - 570 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss | 45 - 131 | ASTM D2457 | |
| Haze | 3.6 - 16 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 193 - 220 | °C |
| Extrusion instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic mLLDPEThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Bayflex® 190 RRIM (20% Mineral) | Covestro - PUR | PUR-Ether/MDI | Bayflex® |
| AMTOPP WT40 | Inteplast Group | PP, Unspecified | AMTOPP |
| FERREX® GPP20CG24WH | Ferro Corporation | PP Homopolymer | FERREX® |
| PLUSTEK PB145 | Polyram Ram-On Industries | Nylon 6 | PLUSTEK |
| Edgetek™ PC-20GF/000 FR BLK | PolyOne Corporation | PC | Edgetek™ |
