Order Products : sales@su-jiao.com
Geon™ Specialty Suspension CG E 24
| Category: | PVC Homopolymer , Polyvinyl Chloride Homopolymer |
| Manufacturer: | Mexichem Specialty Resins, Inc. |
| Trademark: | Geon™ Specialty Suspension |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | usgIuv_Geon-Specialty-Suspension-CG-E-24.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon® CG E24 is a homopolymer specialty suspension resin intended for use in controlling gloss and transparency of injection molded, extruded or plastisol parts. This resin provides low surface gloss and texturing effects for flexible vinyl products, allowing the production of broad range of surface effects without the need for secondary operation process which helps to reduce manufacturing cost. Reduced gloss effects are created throughout the part wall, providing for the continued desired surface aesthetics. The ability to increase surface roughness provides a reduced surface blocking and allows the ease of handling in stacked or bundled parts. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Contamination | Internal method | ||
| Dark Particles 1 | 1 | Internal method | |
| Light Colored Particles 2 | 9 | Internal method | |
| Magnetic Particles 3 | 0 | Internal method | |
| Apparent loose density 4 | 0.380 | g/cm³ | Internal method |
| Particle Size | Internal method | ||
| <105 micron 5 | 40.0 | % | Internal method |
| > 250 micron 6 | 3.00 | % | Internal method |
| Average Particle Size 7 | 125 | µm | Internal method |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Powder Mix Time 8 | 3.3 | min | Internal method |
| Residual Vinyl Chloride Monomer 9 | ppm | Internal method | |
| Volatiles 10 | 0.10 | % | Internal method |
| polymerization process | Suspension | ||
| Porosity 11 | 0.530 | cm³/g | Internal method |
| Flow time- Conditioned Funnel Flow Time 12 | 32.0 | sec | Internal method |
| Note:The value set forth represent 'typical' values and Mexichem Specialty Resins, therefore, makes no representation that the material in any particular shipment will conform to the listed properties.Packaging: This resin is shipped in multi-wall paper bags, netweight 50lbs, 2,500lbs per pallet. Information shown on the package includes commercial identification number, lot, and weight.STP 488 (formulation): 100phr Geon® CG E24, 55phr TOTM, and 18phr Filler |
| Note Message | |
|---|---|
| 1 . | Geon® 1217 |
| 2 . | Geon® STP 1217Unit: #/100in2 |
| 3 . | Geon® STP 1217Unit: #/100in2 |
| 4 . | Geon® STP 1169 |
| 5 . | Through 105 Micron, Microtrac |
| 6 . | Reserved at 250 420 Micron, Microtrac |
| 7 . | Geon® 812 |
| 8 . | Geon® STP 488 (with provide formula) |
| 9 . | Geon® STP 1005 |
| 10 . | Bags, Geon®793 |
| 11 . | Geon® STP 1094 |
| 12 . | Geon® 1169 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mecoline I RDX 5233 | Melos GmbH | TP, Unspecified | Mecoline |
| Vi-Chem PVC VNC66-30I | Vi-Chem Corporation | PVC, Unspecified | Vi-Chem PVC |
| Hostaform® EC270TX | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Sylvin 4260-75UV Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| LNP™ STAT-LOY™ PF303 compound | SABIC Innovative Plastics | Nylon 6 | LNP™ STAT-LOY™ |
