Order Products : sales@su-jiao.com
UNITHENE® LH608
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | USI Corporation |
| Trademark: | UNITHENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | usbd0b_UNITHENE-LH608.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
UNITHENE LH608 is a high density polyethylene (HDPE) suitably used for injection molding. Typical applications are the injection molding of fruit crates, food containers, industrial items such as transportation crates, toys,and housewares. UNITHENE LH608 possesses high impact strength and good resistance to stress cracking, good stiffness, high hardness, good surface gloss, less warpage, low shrinkage. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.962 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 8.8 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 69 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - 1% Secant (Injection Molded) | 971 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 29.4 | MPa | |
| Break | 19.6 | MPa | |
| Tensile Elongation (Break) | 500 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 49 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -76.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Peak Melting Temperature | 135 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2099 X 134514 | RTP Company | PLA | RTP |
| TRIBIT® 1700 | Samyang Corporation | PBT | TRIBIT® |
| Xuchuan XCS-2565C | Xuchuan Chemical (Suzhou) Co., Ltd | PUR, Unspecified | Xuchuan |
| PALRAN® R S H 08 GF 16 | pal plast GmbH | ABS | PALRAN® |
| TECHNYL® C 50H2 BLACK 46 N | Solvay Engineering Plastics | Nylon 6 | TECHNYL® |
