Order Products : sales@su-jiao.com
ASI POLYPROPYLENE 2175
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | A. Schulman Inc. |
| Trademark: | ASI POLYPROPYLENE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | usZL3r_ASI-POLYPROPYLENE-2175.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PP 2175 is a high flow copolymer polypropylene suitable for parts which require a material with the following properties. It is compared below to Toyota TSM 5514G-2 A/B testing requirements. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.903 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 85 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 200 | % | ASTM D638 |
| Flexural Modulus | 1140 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 75 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 108 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tuffalloy™ 4275 | Hapco Inc. | TP, Unspecified | Tuffalloy™ |
| Dryflex® 660350S | ELASTO | SEBS | Dryflex® |
| Elastocon® 8038N | Elastocon TPE Technologies | TPE | Elastocon® |
| TABOREN® PR 75 T 30-098 | SILON s.r.o. | PP Copolymer | TABOREN® |
| LNP™ LUBRICOMP™ KP004 compound | SABIC Innovative Plastics | Acetal (POM) Copolymer | LNP™ LUBRICOMP™ |
