Order Products : sales@su-jiao.com
ARCEL® 730B (3.00 pcf)
| Category: | PS+PE , Polystyrene + PE |
| Manufacturer: | NOVA Chemicals |
| Trademark: | ARCEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ursKRW_ARCEL-730B-3-00-pcf-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ARCEL® 730B (3.00 pcf) is a Polystyrene + PE (PS+PE) material. It is available in North America for foam processing. Typical application of ARCEL® 730B (3.00 pcf): Foam |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.0481 | g/cm³ | ASTM D3575 |
| Particle Size - 98% | 0.800 to 1.70 | mm | |
| VOC Content | |||
| Pentane | 11 | % | |
| Plasticizer | 0.30 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strain | 9.4 | % | ASTM C203 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength - at Maximum Load | 3.9 | kN/m | ASTM D3575 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 0.645 | MPa | ASTM D3575 |
| Flexural Strength | ASTM C203 | ||
| -- | 0.656 | MPa | |
| 5.0% Strain | 0.600 | MPa | |
| Compressive Strength | ASTM D3575 | ||
| 10% Strain | 0.299 | MPa | |
| 25% Strain | 0.341 | MPa | |
| 50% Strain | 0.418 | MPa | |
| 75% Strain | 0.811 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Telcar® TL-2635A | Teknor Apex Company | TPE | Telcar® |
| Nivionplast® A R306GY NAT | SO.F.TER. SPA | Nylon 66 | Nivionplast® A |
| NYCOA Polyamide 5300 ST | Nycoa (Nylon Corporation of America) | Nylon 66 | NYCOA Polyamide |
| Eastar™ GN007, Natural | Eastman Chemical Company | PETG | Eastar™ |
| Hylon® N1040MGHLUV2 | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
