Index
About
Search
Contact Us
Order Products​ : sales@su-jiao.com

CALIBRE™ MEGARAD™ 2081-15

Category: PC , Polycarbonate Resin
Manufacturer: Trinseo
Trademark: CALIBRE™
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: uqFLMv_CALIBRE-MEGARAD-2081-15.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
CALIBRE™ MEGARAD 2081-15 Polycarbonate resin provides end-users of radiation sterilized medical devices a color closer to the water-clear look of the natural resin. When exposed to high energy radiation (gamma or electron beam), CALIBRE MEGARAD 2081-15 resin can reduce the color shift by 50% compared to general purpose polycarbonate resins. CALIBRE 2081-15 resin has undergone biocompatibility testing based on ISO 10993 (Biological Evaluation of Medical Devices) and is suitable for use in approved medical applications.

Main Characteristics:
  • Stabilized for higher engery radiation
  • Tested under ISO 10993
  • Transparent
  • Contains mold release

Applications:
  • Medical applications
General Information
Additive
  • Mold Release
Features
  • Biocompatible
Uses
  • Electrical/Electronic Applications
  • General Purpose
  • Medical/Healthcare Applications
Agency Ratings
  • ISO 10993 2
Appearance
  • Clear/Transparent
Forms
  • Pellets
Processing Method
  • Injection Molding
Multi-Point Data
  • Specific Heat vs. Temperature (ASTM D3417)
  • Specific Volume vs Temperature (ISO 11403-2)
  • Tensile Stress vs. Strain (ASTM D638)
  • Thermal Conductivity vs. Temperature (ASTM E1530)
  • Viscosity vs. Shear Rate (ASTM D3835)
PhysicalNominal ValueUnitTest Method
Specific Gravity
    -- 1.20g/cm³ASTM D792, ISO 1183/A
    -- 1200kg/m³ISO 1183 1
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)15g/10 minASTM D1238, ISO 1133
Melt volume-flow rate (300°C/1.2 kg)12.0cm³/10minISO 1133 2
Molding Shrinkage - Flow 0.50 to 0.70%ASTM D955, ISO 294-4
Water Absorption ASTM D570, ISO 62
    23°C, 24 hr 0.15%
    Equilibrium, 23°C, 50% RH 0.32%
HardnessNominal ValueUnitTest Method
Rockwell Hardness (R-Scale)118ASTM D785
MechanicalNominal ValueUnitTest Method
Tensile Modulus
    -- 32210MPaASTM D638
    -- 2300MPaISO 527-2/50, ISO 527-2 4
Tensile Strength
    Yield 562.1MPaASTM D638
    Yield 62.0MPaISO 527-2/50, ISO 527-2 6
    Break 768.3MPaASTM D638
    Break 68.0MPaISO 527-2/50
Tensile Elongation
    Yield 86.0%ASTM D638
    Yield 6.0%ISO 527-2/50, ISO 527-2 9
    Break 10150%ASTM D638
    Break 150%ISO 527-2/50
Nominal strain at break > 50%ISO 527-2 11
Flexural Modulus
    -- 122410MPaASTM D790
    -- 2400MPaISO 178
Flexural Strength
    -- 1396.5MPaASTM D790
    -- 98.0MPaISO 178
Taber Abrasion Resistance 45%ASTM D1044
ImpactNominal ValueUnitTest Method
Charpy Notched Impact Strength
    23°C 25kJ/m²ISO 179/1eA
    -30°C 12.0kJ/m²ISO 179/1eA 14
    23°C 80.0kJ/m²ISO 179/1eA 15
Charpy impact strength ISO 179/1eU 16
    -30°C No Break
    23°C No Break
Notched Izod Impact
    23°C 750J/mASTM D256
    23°C 75kJ/m²ISO 180/A
Unnotched Izod Impact (23°C)No BreakASTM D256, ISO 180
Instrumented Dart Impact 17(23°C, Total Energy)81.3JASTM D3763
Tensile Impact Strength 378kJ/m²ASTM D1822
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load
    0.45 MPa, Annealed 139°CASTM D648
    0.45 MPa 137°CISO 75-2 18
    1.8 MPa, Unannealed 122°CASTM D648
    1.8 MPa, Unannealed 120°CISO 75-2/A
    1.8 MPa, Annealed 136°CASTM D648
    1.8 MPa 123°CISO 75-2 19
Vicat Softening Temperature
    -- 148°CASTM D1525 20
    -- 143°CISO 306/B50
    50°C/h, B (50N) 143°CISO 306 21
CLTE - Flow
    -40 to 82°C 6.8E-5cm/cm/°CASTM D696
    -- 7.0E-5cm/cm/°CISO 11359-2 22
ElectricalNominal ValueUnitTest Method
Volume Resistivity
    -- 2.0E+17ohms·cmASTM D257
    -- > 1.0E+13ohms·mIEC 60093 23
Dielectric Strength 17kV/mmASTM D149, IEC 60243-1 3 24
Dielectric Constant
    60 Hz 3.00ASTM D150
    1 MHz 3.00ASTM D150, IEC 60250 25
    100 Hz 3.00IEC 60250 26
Dissipation Factor
    50 Hz 1.0E-3ASTM D150
    1 MHz 2.0E-3ASTM D150, IEC 60250 27
    100 Hz 1.0E-3IEC 60250 28
FlammabilityNominal ValueUnitTest Method
Burning Behav. at 1.6mm nom. thickn. (1.60 mm, UL)HBISO 1210 29
Burning Behav. at thickness h (3.20 mm, UL)HBISO 1210 30
OpticalNominal ValueUnitTest Method
Refractive Index 1.586ASTM D542, ISO 489
Transmittance 85.0%ASTM D1003
Haze 1.0%ASTM D1003
Note Message
1 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
2 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
3 .50 mm/min
4 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
5 .50 mm/min
6 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
7 .50 mm/min
8 .50 mm/min
9 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
10 .50 mm/min
11 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
12 .Method I (3 point load), 2.0 mm/min
13 .Method I (3 point load), 2.0 mm/min
14 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
15 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
16 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
17 .3.39 m/sec
18 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
19 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
20 .Rate A (50°C/h), Loading 2 (50 N)
21 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
22 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
23 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
24 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
25 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
26 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
27 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
28 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
29 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
30 .Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
Resin Grade Manufacturer Category Trademark
ALTECH® PP-B B 4915/500 MR15 ALBIS PLASTIC GmbH PP Copolymer ALTECH® PP-B
BorSafe™ HE3495-LS Borealis AG HDPE BorSafe™
EnCom PPE-PS 211-64 EnCom, Inc. PPE+PS EnCom
INNOPOL® PP CS 3-9230 KAR Inno-Comp Ltd. PP Alloy INNOPOL® PP
LubriOne™ LB9800-8001 AR Black PolyOne Corporation PEEK LubriOne™

TEL: +86-21-58958519 Email:sales@su-jiao.com

No. 215, Lianhe North Road, Fengxian District, Shanghai, China​， COPYRIGHT SUSHENG COMPANY RIGHTS RESERVED