Order Products : sales@su-jiao.com
LNP™ LUBRICOMP™ ZX05506 compound
| Category: | PPE+PS , Polyphenylene Ether + PS |
| Manufacturer: | SABIC Innovative Plastics |
| Trademark: | LNP™ LUBRICOMP™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | upPeFO_LNPLUBRICOMPZX05506compound.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
LNP LUBRICOMP* ZX05506 is a compound based on PPE+PS Blend resin containing Graphite Powder, PTFE. Added features of this material include: Internally Lubricated. Also known as: LNP* LUBRICOMP* Compound ZML-4334 Product reorder name: ZX05506 |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.35 | g/cm³ | ASTM D792, ISO 1183 |
| Molding Shrinkage | |||
| Flow : 24 hours | 0.50 | % | ASTM D955 |
| Transverse flow : 24 hours | 0.50 | % | ASTM D955 |
| Vertical flow direction : 24 hours | 0.54 | % | ISO 294-4 |
| Flow direction : 24 hours | 0.50 | % | ISO 294-4 |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 0.50 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | |||
| -- 1 | 4900 | MPa | ASTM D638 |
| -- | 4910 | MPa | ISO 527-2/1 |
| Tensile Strength | |||
| Fracture | 52.5 | MPa | ASTM D638 |
| Fracture | 50.0 | MPa | ISO 527-2 |
| Tensile Elongation | |||
| Fracture | 2.4 | % | ASTM D638 |
| Fracture | 2.5 | % | ISO 527-2 |
| Flexural Modulus | |||
| -- | 4960 | MPa | ASTM D790 |
| -- | 5370 | MPa | ISO 178 |
| Flexural Strength | |||
| -- | 99.2 | MPa | ASTM D790 |
| -- | 94.7 | MPa | ISO 178 |
| Coefficient of Friction | ASTM D3702 Modified | ||
| With self-dynamics | 0.34 | ASTM D3702 Modified | |
| With Self-Static | 0.34 | ASTM D3702 Modified | |
| Wear Factor - Washer | 174 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| 23°C | 32 | J/m | ASTM D256 |
| 23°C 2 | 2.9 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact | |||
| 23°C | 180 | J/m | ASTM D4812 |
| 23°C 3 | 13 | kJ/m² | ISO 180/1U |
| Instrumented Dart Impact | |||
| 23°C, Energy at Peak Load | 3.80 | J | ASTM D3763 |
| -- | 1.23 | J | ISO 6603-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 1.8 MPa, unannealed, 3.20mm | 122 | °C | ASTM D648 |
| 1.8 MPa, unannealed, 64.0mm span 4 | 126 | °C | ISO 75-2/Af |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 277 - 288 | °C | |
| Middle Temperature | 288 - 299 | °C | |
| Front Temperature | 299 - 310 | °C | |
| Processing (Melt) Temp | 299 - 304 | °C | |
| Mold Temperature | 82.2 - 110 | °C | |
| Back Pressure | 0.172 - 0.344 | MPa | |
| Screw Speed | 30 - 60 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 80*10*4 |
| 3 . | 80*10*4 |
| 4 . | 80*10*4 mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC M1490 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Yanshan PE LD615 | SINOPEC Beijing Yanshan Petrochemical | LDPE | Yanshan PE |
| Unichem 89-379DL-30 | Colorite Polymers | PVC, Flexible | Unichem |
| AKROMID® B3 GF 15 S1 black (1270) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| KOPA® KN111SB | Kolon Plastics, Inc. | Nylon 6 | KOPA® |
