Order Products : sales@su-jiao.com
CarbonResin FPU 230
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Carbon3D, Inc. |
| Trademark: | CarbonResin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | upCng1_CarbonResinFPU230.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FPU 230 is an impact, abrasion and fatigue resistant semi-rigid material that is a good choice for parts that must withstand repetitive stresses such as living hinges or friction fits. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density 1 | 1.00 - 1.02 | g/cm³ | |
| Viscosity (25°C) | 1.80 - 2.00 | Pa·s |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 600 - 850 | MPa | ASTM D638 |
| Tensile Strength | ASTM D638 | ||
| Yield | 14.0 - 16.0 | MPa | ASTM D638 |
| Fracture | 23.0 - 28.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 200 - 250 | % | ASTM D638 |
| Flexural Modulus | 800 - 900 | MPa | ASTM D790 |
| Flexural Strength | 20.0 - 24.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -- 2 | 35 - 39 | J/m | ASTM D256 |
| -- 3 | 40 - 60 | J/m | ASTM D256 |
| Unnotched Izod Impact | 1500 - 1700 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 52.0 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 38.0 | °C | ASTM D648 |
| Glass Transition Temperature | DMA | ||
| -- 4 | 60.0 | °C | DMA |
| -- 5 | 98.0 | °C | DMA |
| CLTE - Flow | 1.6E-4 - 1.7E-4 | cm/cm/°C | ASTM E228 |
| Note Message | |
|---|---|
| 1 . | Liquid |
| 2 . | Machined Notch |
| 3 . | Printed Notch |
| 4 . | E' |
| 5 . | tan(d) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trademark PE LDVA2926.6 | Trademark Plastics Corporation | LDPE+EVA | Trademark PE |
| Wondel® P PR0G4 | Nanjing Julong Engineering Plastics Co., LTD | PP, Unspecified | Wondel® P |
| Badamid® LB75 K | Bada AG | Nylon 6 | Badamid® |
| AMTOPP VS19 | Inteplast Group | PP, Unspecified | AMTOPP |
| Kepamid® 2340GF | Korea Engineering Plastics Co., Ltd | Nylon 66 | Kepamid® |
