Order Products : sales@su-jiao.com
KRATON® D4150 K
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uoBsxG_KRATON-D4150-K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below.
Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.920 | g/cm³ | ASTM D4025 |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 9.5 | g/10 min | |
| Antioxidant Additive | 0.13 to 0.35 | % | Internal Method |
| Ash Content - T, Talc | 0.25 to 0.45 | % | Internal Method |
| Oil | 32 to 34 | % | Internal Method |
| Polystyrene Content | 29 to 33 | % | Internal Method |
| Solution Viscosity - Toluene, 25%wt (25°C) | 850 | mPa·s | Internal Method |
| Volatile Matter | < 0.70 | % | Internal Method |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| Diblock Content | 17.0 | ||
| Styrene/Rubber ratio | 31/69 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec, Compression Molded) | 45 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(300% Strain) | 1.10 | MPa | ASTM D412 |
| Tensile Strength 2(Yield) | 19.3 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 1400 | % | ASTM D412 |
| Note Message | |
|---|---|
| 1 . | Measured on films cast from a solution in toluene. |
| 2 . | Measured on films cast from a solution in toluene. |
| 3 . | Measured on films cast from a solution in toluene. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXAMID™ PA66G43-BK10 | Pier One Polymers, Inc. | Nylon 66 | MAXAMID™ |
| RTP 600 HB | RTP Company | ABS | RTP |
| Ravago Compounds HM-278 | Ravago Manufacturing Americas, LLC | LLDPE | Ravago Compounds |
| Stanyl® TW241F12 | DSM Engineering Plastics | Nylon 46 | Stanyl® |
| Hylon® N1240MG25HL | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
