Order Products : sales@su-jiao.com
Safron® H504-12M
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Safripol (PTY) LTD |
| Trademark: | Safron® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | umzWPD_Safron-H504-12M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Safron® H504-12M Polypropylene Resin is recommended for the spinning of staple fibre in the range 2 - 25 denier. It is also used for the manufacture of BCF yarns. Safron® H504-12M Polypropylene Resin is a medium to high flow injection moulding grade for applications where rigidity and fast cycle times are essential. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, Injection Molded) | 30.0 | MPa | ISO 527-2 |
| Tensile Strain (Yield, Injection Molded) | 7.5 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 1360 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Injection Molded) | 2.3 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1 | |||
| 0.45 MPa, not annealed | 83.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 55.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature 2 | 85.0 | °C | ISO 306/B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 - 200 | °C | |
| Middle Temperature | 220 - 230 | °C | |
| Front Temperature | 240 - 260 | °C | |
| Nozzle Temperature | 240 | °C |
| Injection instructions |
|---|
| Zone 4 Temperature: 250°C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 180 - 240 | °C | |
| Cylinder Zone 2 Temp. | 230 - 250 | °C | |
| Cylinder Zone 3 Temp. | 240 - 270 | °C | |
| Cylinder Zone 4 Temp. | 270 | °C | |
| Die Temperature | 240 - 260 | °C |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| 2 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RELENE® 52GB002 | Reliance Industries Limited | HDPE, HMW | RELENE® |
| Retpol® 7025/4 UV3 | PolyPacific Pty. Ltd. | PP, Unspecified | Retpol® |
| Ultraform® N 2320 0035 LEV | BASF Corporation | Acetal (POM) Copolymer | Ultraform® |
| O'Tech OW 641 TP | O'Tech Corporation | PVC, Unspecified | O'Tech |
| POLIMAXX 1111NXGA6 | IRPC Public Company Limited | PP Homopolymer | POLIMAXX |
