Order Products : sales@su-jiao.com
Prime PE HMWPE 1000 SR
| Category: | HMWPE , High Molecular Weight Polyethylene |
| Manufacturer: | Primex Plastics Corporation |
| Trademark: | Prime PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ulpDBP_Prime-PE-HMWPE-1000-SR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Prime HMWPE SR is a coextruded product consisting of a cap layer on both sides of the sheet to provide a skid resistant surface. Applications: Prime HMWPE SR is designed for pallets, dunnage trays, truck bed liners or any other parts that require a high COF. Processing: Prime HMWPE 1000 SR is extruded and thermoformed using the same conditions as HMWPE. However, an A-B-A feed block is required for extruding the 3-layer sheet. Finishing: Cutting and machining of this product may be done by sawing, drilling, grinding, sanding, punching, die cutting and routing. The material may be bonded with mechanical fasteners and sonic welding. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Prime HMWPE SR can be color matched to meet your specific requirements. Available textures include H/C, Levant II, Seville, RM and Levant III. This product is offered in .100 to .400 in. total thickness and up to 160" wide. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.944 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(190°C/2.16 kg) | 12 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (F50) | > 600 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 20.7 | MPa | ASTM D638 |
| Flexural Modulus | 1170 | MPa | ASTM D790 |
| Coefficient of Friction | 0.44 | ASTM D3028 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 270 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 60.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 116 | °C | ASTM D1525 |
| Melting Temperature | 130 | °C | |
| CLTE - Flow | 1.3E-4 | cm/cm/°C | ASTM D696 |
| Note Message | |
|---|---|
| 1 . | HLMI |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DOW™ HDPE DMDA-8910 NT 7 | The Dow Chemical Company | HDPE | DOW™ HDPE |
| Gallonprene® GP210-9011 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Geon™ Vinyl Flexible D8500 | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| Infino GP-8200G | SAMSUNG SDI CO., LTD. | PPE | Infino |
| Petrothene® GA635662 | LyondellBasell Industries | LLDPE | Petrothene® |
