Order Products : sales@su-jiao.com

VICOTE® 702

Category:	PEEK , Polyetheretherketone
Manufacturer:	Victrex plc
Trademark:	VICOTE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	uhepxl_VICOTE-702.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
VICOTE 701-707 grades are specially developed powder coatings. They are available in various average particle sizes from 10 - 50 microns. The powders are off-white in color and are available in various melt viscosities depending on the film thickness and level of melt flow required. Typical film thicknesses range from < 100 microns up to 500 microns. Film thicknesses above 1 mm are possible by building up the coating thickness by the hot flocking technique. Like other non-coating grades of VICTREX PEEK polymer, VICOTE Coatings are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines, the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for. High continuous use temperature of 260°C Excellent wear, abrasion and cut through resistance at these high temperatures Excellent chemical and radiation resistance Low level of extractables Hydrolysis resistant Inherently flame retardant

Message

VICOTE 701-707 grades are specially developed powder coatings. They are available in various average particle sizes from 10 - 50 microns. The powders are off-white in color and are available in various melt viscosities depending on the film thickness and level of melt flow required. Typical film thicknesses range from < 100 microns up to 500 microns. Film thicknesses above 1 mm are possible by building up the coating thickness by the hot flocking technique.

Like other non-coating grades of VICTREX PEEK polymer, VICOTE Coatings are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines, the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for.

High continuous use temperature of 260°C

Excellent wear, abrasion and cut through resistance at these high temperatures

Excellent chemical and radiation resistance

Low level of extractables

Hydrolysis resistant

Inherently flame retardant

General Information
Features	Flame Retardant Good Abrasion Resistance Good Chemical Resistance Good Wear Resistance High Heat Resistance Hydrolysis Resistant Low Extractables Radiation (Gamma) Resistant
Uses	Coating Applications
Agency Ratings	FDA 21 CFR 175.300
Appearance	Natural Color
Forms	Powder
Processing Method	Coating

Physical	Nominal Value	Unit	Test Method
Density	1.32	g/cm³	ISO 1183

Thermal	Nominal Value	Unit	Test Method
Glass Transition Temperature	143	°C	DSC
Melting Temperature	343	°C	DSC
RTI Elec	260	°C	UL 746
RTI Imp	260	°C	UL 746
RTI Str	260	°C	UL 746

Additional Information	Nominal Value	Unit	Test Method
Konig Hardness	3.3	min	ISO 1522

Extrusion	Nominal Value	Unit
Drying Temperature	120 to 150	°C
Drying Time	< 3.0	hr

Resin Grade	Manufacturer	Category	Trademark
Starflam AFR560B1	Eurostar Engineering Plastics	Nylon 66	Starflam
Yuyao PPO GFN3-801	Yuyao Tenglong Plastics Co., Ltd.	PPE+PS	Yuyao PPO
CYCOLOY™ NX07353 resin	SABIC Innovative Plastics Asia Pacific	PC+ABS	CYCOLOY™
Ferro PP TPP40AF58UL ALMOND	Ferro Corporation	PP Homopolymer	Ferro PP
Generic Nylon 66+Nylon 6I/X	Generic	Nylon 66+Nylon 6I/X	Generic