Order Products : sales@su-jiao.com
MAJORIS DEG308X - 6744
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | AD majoris |
| Trademark: | MAJORIS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uhRXy6_MAJORIS-DEG308X---6744.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MAJORIS DEG308X-6744 is a high performance reinforced polypropylene compound intended for injection moulding. The product is available in natural, but other colours can be provided on request. MAJORIS DEG308X-6744 has been developed especially for demanding applications in various engineering sectors. MAJORIS DEG308X-6744 has high rigidity and impact strength, good dimensional stability, very good stiffness and good creep resistancy also at high temperatures. APPLICATIONS Product requiring very high overall mechanical performance such as:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.18 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 6.0 | g/10 min | ISO 1133 |
| Molding Shrinkage | Internal method | ||
| Vertical flow direction : 2.00mm | 0.80 | % | Internal method |
| Flow direction : 2.00mm | 0.30 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 5650 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield) | 76.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | 3.8 | % | ISO 527-2/50 |
| Flexural Modulus 1 | 5800 | MPa | ISO 178 |
| Flexural Stress | 130 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 13 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | 50 | kJ/m² | ISO 179/1eU |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 230 - 270 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Moderate | ||
| Holding Pressure | 30.0 - 60.0 | MPa |
| Injection instructions |
|---|
| Screw speed: Low to mediumBack pressure: Low to medium |
| Note Message | |
|---|---|
| 1 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sunny® PA6 EN400 | Guangdong Shunde Shunyan New Material Co., Ltd. | Nylon 6 | Sunny® |
| AMTOPP TT35 | Inteplast Group | PP, Unspecified | AMTOPP |
| En Chuan 6012 | En Chuan Chemical Industries Co,. Ltd. | Polyester, TS | En Chuan |
| Geon™ Vinyl Wire & Cable WJCK510H | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Wire & Cable |
| LOXIM 230 01 HB | LOXIM Industries Private Limited | PBT | LOXIM |
