Order Products : sales@su-jiao.com
EPO-TEK® TZ101
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxy Technology Inc. |
| Trademark: | EPO-TEK® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ugrszu_EPO-TEK-TZ101.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EPO-TEK® TZ101 is a single component, electrically insulating, thermally conductive epoxy adhesive designed for heat-sinking of semiconductors, hybrids, electronics, and optics. Also available in a frozen syringe. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Ion Type | |||
| Cl- | 240 | ppm | |
| K+ | 8 | ppm | |
| Na+ | 188 | ppm | |
| NH4+ | 19 | ppm | |
| Particle Size | < 20.0 | µm |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Degradation Temperature | 355 | °C | TGA |
| Die Shear Strength - >10 kg (23°C) | 23.4 | MPa | |
| Operating Temperature | |||
| Continuous | -55 to 175 | °C | |
| Intermittent | -55 to 275 | °C | |
| Storage Modulus (23°C) | 3.54 | GPa | |
| Thixotropic Index | 3.70 | ||
| Weight Loss on Heating | |||
| 200°C | 0.40 | % | |
| 250°C | 0.90 | % | |
| 300°C | 1.9 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature 1 | > 40.0 | °C | |
| CLTE - Flow | |||
| -- 2 | 3.2E-5 | cm/cm/°C | |
| -- 3 | 1.7E-4 | cm/cm/°C | |
| Thermal Conductivity | 0.93 | W/m/K |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shelf Life (-40°C) | 52 | wk |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color | White | ||
| Density | 1.37 | g/cm³ | |
| Viscosity 4(23°C) | 24 to 30 | Pa·s | |
| Curing Time (150°C) | 1.0 | hr | |
| Pot Life | 40000 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 84 | ||
| Lap Shear Strength (23°C) | 11.9 | MPa | |
| Relative Permittivity (1 kHz) | 3.80 | ||
| Volume Resistivity (23°C) | > 2.0E+13 | ohms·cm | |
| Dissipation Factor (1 kHz) | 4.0E-3 |
| Note Message | |
|---|---|
| 1 . | Dynamic Cure 20-200°C/ISO 25 Min; Ramp -40-200°C @ 20°C/Min |
| 2 . | Below Tg |
| 3 . | Above Tg |
| 4 . | 10 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P2755 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| Shandong PP PQ02 | Shandong Dongchen Engineering Plastics Co., Ltd. | PP, Unspecified | Shandong PP |
| Edgetek™ NN-35MG/000 Black v1.1 | PolyOne Corporation | Nylon 66 | Edgetek™ |
| Epiall® 1908B | Vyncolit N.V. | Epoxy | Epiall® |
| Iupiace® LV60 | Mitsubishi Engineering-Plastics Corp | PPE+PS | Iupiace® |
