Order Products : sales@su-jiao.com
Exxtral™ Performance Polyolefin HMU210
| Category: | TPO , Polypropylene, Compounded (TPO) |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | Exxtral™ Performance Polyolefin |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ughpAM_Exxtral-Performance-Polyolefin-HMU210.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A special thermoplastic polyolefin black resin with high rigidity is suitable for automotive HVAC and parts under the hood. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 12 | g/10 min | ISO 1133 |
| Melt Volume-Flow Rate (MVR) (230°C/2.16 kg) | 14.0 | cm³/10min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus - Secant | 2910 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 33.7 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield) | 5.2 | % | ISO 527-2/50 |
| Flexural Modulus | 2940 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Complete Break) | 3.3 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 116 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 63.0 | °C | ISO 75-2/A |
| Additional Information |
|---|
| Unless otherwise specified herein: data were prepared pursuant to ExxonMobil's sampling and testing procedures in effect at time of production; and applicable sampling and testing methods are available upon request. Values may result from interpolation or correlation of other data.Sampling and testing methods are subject to change without notice unless otherwise agreed in writing. |
| Legal statement |
|---|
| 本产品不宜在医疗应用中使用，亦不应在任何此类应用中使用本产品不宜在与食品接触的应用中使用。 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PC 19 GF 20 | Plastcom | PP, Unspecified | SLOVALEN® |
| ALTECH® PA66 A 2030/109 GF30 BK1009-13LS | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| APEX® 1520 | Teknor Apex Company | PVC, Flexible | APEX® |
| POLYfill PP CQX15015 R3 UV | Polykemi AB | PP, Unspecified | POLYfill |
| VALOX™ K3501 resin | SABIC Innovative Plastics | PBT | VALOX™ |
